EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2–Splash Zone certified
Precisely formed lens provides maximum efficiency/reduced glare
Seamless closed-cell gasket, poured and formed in place
Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
Liquid-tight power entry
Standard stainless steel latches protect the fixture from corrosion in harsh environments
Tamper-resistant latches available
Low ambient option for extreme cold environments such as walk-in freezers and refrigerated spaces
High-performance up to 158 lm/W
DLC Compliant
Build America, Buy America and Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Specifikation

Enclosure	Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.
Internal Housing	.050″ aluminum.
Latching	Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).
Reflector	95% reflective highly specular aluminum.
Reflective Surfaces	92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.
Shielding	Frosted, impact-resistant acrylic.
Electrical	High-quality mid-power LED board. L70 >72,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option. 50/60 Hz constant current driver.
Power Supply	Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.
Mounting	Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.
Listings	• cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option. • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X. • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL. • Pressure wash rated to 1500 PSI. • RoHS compliant. • Build America, Buy America (BABA) and Buy American Act (BAA) compliant. Request certification at hew.com/buy-american.
Warranty	5-year limited warranty, see details

Teknisk specifikation

Unik ref.egl-enclosedgasketed-industrial
ProduktfamiljIndoor Luminaires
ProduktgruppVandal Resistant
TypObjekt (enstaka objekt)
Publiceringsdatum2025-06-18
Edition nummer1

Länkar

Produkt-urlhttps://hew.com/products/EGL
Installationsinstruktionerhttps://hew.com/instruction/EGL2_instructions.pdf
Teknisk beskrivninghttps://hew.com/specifications/EGL_led.pdf

Relaterad

HuvudmaterialMetall
Sekundärt materialGlas
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobject-kategoriBelysning - Takmonterad
IFC klassificeringLamparmatur
Uniclass 2015 kodEF_70_80
Uniclass 2015 beskrivningLighting
CSI MasterFormat 2014 Kod26 51 13
CSI MasterFormat 2014 TitelInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass nummer23-35 47 11
OmniClass TitelLighting Fixtures

Region tillgänglighet

Nordamerika
Amerikanska Jungruöarna
Anguilla
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
British Virgin Islands
Caymanöarna
Costa Rica
Curaçao
Dominica
Dominikanska republiken
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Saint-Pierre-et-Miquelon
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA