JM Corbond IV® Closed-Cell Spray Foam
JM Corbond IV® Closed-Cell Spray Foam

    JM Corbond IV® Closed-Cell Spray Foam

    JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

    Specifikation
    • PART 2 - PRODUCTS

      CLOSED-CELL SPRAY POLYURETHANE FOAM

      1. Closed-Cell Spray Polyurethane Foam: ASTM C 1029, Type II, minimum density of 1.8 lb/cu. ft. and minimum aged R-value at 1-inch thickness of 6.8 deg F x h x sq. ft./Btu at 75 deg F.
      1. 1. Surface-Burning Characteristics: Comply with ASTM E 84; testing by a qualified testing agency. Identify products with appropriate markings of applicable testing agency.
      1. a. Flame-Spread Index: 25 or less.
      2. b. Smoke-Developed Index: 450 or less.

      Fire Propagation Characteristics: Passes NFPA 285 testing as part of an approved assembly.

      Manufacturers: Subject to compliance with requirements, provide products by one of the following:

      1. a. Johns Manville, “Corbond IV”; www.jm.com
    Teknisk specifikation
    • Unik ref.jm-corbond-iv-closed-cell-spray-foam
    • ProduktfamiljBuilding Insulation
    • ProduktgruppSpray Foam Insulation
    • TypObjekt (enstaka objekt)
    • Publiceringsdatum2026-07-15
    • Edition nummer1
    Relaterad
    • HuvudmaterialPolyuretan
    • Designad iUSA
    • Tillverkad iUSA
    Klassificering
    • BIMobjektkategoriByggnadsmaterial - Isolering
    • CSI MasterFormat 2014 Kod07 21 19
    • CSI MasterFormat 2014 TitelFoamed-In-Place Insulation
    • OmniClass nummer23-13 25 19
    • OmniClass TitelThermal Insulation 

    Region tillgänglighet

    Nordamerika
    Amerikanska Jungruöarna
    Anguilla
    Antigua och Barbuda
    Aruba
    Bahamas
    Barbados
    Belize
    Bermuda
    British Virgin Islands
    Caymanöarna
    Costa Rica
    Curaçao
    Dominica
    Dominikanska republiken
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    Jamaica
    Kanada
    Karibiska Nederländerna
    Kuba
    Martinique
    Mexiko
    Montserrat
    Nicaragua
    Panama
    Puerto Rico
    Saint Christopher och Nevis
    Saint Lucia
    Saint Vincent och Grenadinerna
    Saint-Barthélemy
    Saint-Martin
    Saint-Pierre-et-Miquelon
    Sint Maarten
    Trinidad och Tobago
    Turks och Caicos Islands
    USA
    Common.Footer.ValueProp.Image.AltText

    Design App för Revit

    Ladda familjer direkt till din Revit-modell med ett klick

    Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

    • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
    • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
    • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit