Publicera dina produkter

Prado Red Pressed Facing Brick

Prado Red Pressed Facing Brick

Cerámica Malpesa

Arkiverad

Prado Red Pressed Facing Brick

The pressing process involves crushing the clay between two facing presses, which force it into a mold in the shape of the final unit. The press surfaces are in relief to produce raised and sunken areas in the units. The outer shape of the unit produced therefore depends on the mold cavity. Facing bricks manufactured by pressing a mixture of clays and water. After drying off the water added for the extrusion, the bricks are fired in an oxidizing atmosphere in a Tunnel Kiln. Each model is burned at its own optimal firing temperature (always >1000º C). Due to the carbonate content in the clay, the suction (initial rate of water absorption) of these products is greater than 0.10 gr/cm2 minute. To avoid having to wet the bricks before they are laid (a necessary, although not always applied, measure with suction of over 0.10 gr/cm2 minute), they are there forewaterproofed by immersion or soaking with a silicon compound after leaving the kiln and before being packed. This treatment improves their layability, facilitates cleaning and keeps wall attractive and free from contamination over a long period of time.

Specifikation

Available sizes (mm): 240X120X50

Teknisk specifikation

Unik ref.Ladrillo-Caravista-Prensado-Rojo-Prado
ProduktfamiljLadrillo Caravista / Facing Brick
ProduktgruppPressed Facing Brick/Ladrillo Prensado
TypObjekt (enstaka objekt)
Publiceringsdatum2019-08-01
Edition nummer1
Höjd (mm)50
Bredd (mm)240
Djup (mm)120

Länkar

Produkt-urlhttp://www.malpesa.es/en/detalle_final_producto.php?idc=2&ids=6&id=106
Installationsinstruktionerhttp://www.malpesa.es/pdf/publicaciones/M_Recom0903.pdf
Instruktionsvideohttp://www.malpesa.es/video.html
Produktcertifieringhttp://www.malpesa.es/pdf/CERTIFICADO_ER_13-11-2015.pdf
Teknisk beskrivninghttps://www.malpesa.es/pdf/ladrillo/106--ficha.pdf

Relaterad

HuvudmaterialKeramik
Sekundärt materialMurverk
Designad iSpanien
Tillverkad iSpanien
Vikt netto (kg)2.5

Klassificering

BIMobjektkategoriByggnadsmaterial - Murverk
IFC klassificeringVägg
UNSPSC namnCeramic bricks
UNSPSC kod30131602
Uniclass 2015 kodPr_20_93_52_15
Uniclass 2015 beskrivningClay bricks
CSI MasterFormat 2014 Kod04 21 13
CSI MasterFormat 2014 TitelBrick Masonry
OmniClass nummer23-13 21 19 13
OmniClass TitelFace Bricks
CSI UniFormat II KodB2010
CSI UniFormat II TitelExterior Walls

Liknande produkter

bild för Face Brick White Glazed Brick

Cerámicas Mora Face Brick White Glazed Brick

bild för ICMU Insultech Oldcastle OEBE Strecher Unit

Echelon ICMU Insultech Oldcastle OEBE Strecher Unit

bild för Madrid Red Pressed Facing Brick

Cerámica Malpesa Madrid Red Pressed Facing Brick

bild för Face Brick Venus Brick

Cerámicas Mora Face Brick Venus Brick

bild för Pedestrian and Light Traffic Paving Brick

Endicott Clay Products Co. Pedestrian and Light Traffic Paving Brick

bild för 8" Core Blocks

CELBLOX® 8" Core Blocks

Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

Arbeta direkt med BIM-objekt bredvid Revit
2 GB molnlagring - lagra ditt Revit-innehåll
Få inbyggd kol-LCA (A1-A3) direkt från Revit