Raychem 460 Pipe Tracing Controller
Raychem 460 Pipe Tracing Controller
Raychem 460 Pipe Tracing Controller
    Chemelex

    Raychem 460 Pipe Tracing Controller

    The Raychem 460 is a c-UL-us Listed single-point heat tracing controller designed for pipe freeze protection, flow maintenance and heat loss replacement applications. It includes a 5" inch color touch screen display for intuitive set up and programming right out of the box. The 460 controller may be used with line-sensing or ambient-sensing and Proportional Ambient-Sensing Control (PASC) modes. It measures temperatures with two 2 KOhm / 77°F (25°C), 2-wire Thermistor connected directly to the unit. The controller can also measure ground fault current to ensure system integrity. The controller includes ground fault current sensing and relaying equipment compliant with UL1053 standard.

    Specifikation
    • Features

      • Simple and fast to install and operate with colored touchscreen for easy navigation
      • Advanced features such as High Temperature cut-out, Autocycle, Event logs for safe and efficient operation
      • Built-in ground fault protection functionality evaluated per UL1053 standard. Easiliy adjustable ground fault alarm and trip settings
      • Flexible and intuitive set-up reduces set-up time
      • USB port for firmware updates, download monitoring reports and remote battery powered setup
      • Built-in Form C Alarm relay with flexible set up for Normally Open/Normally Closed operation

      Specifications

      Alarm Relay: Single Pole Single Throw Relay, Volt-free: Maximum Switching Capacity:1 A @ 24 VDC, 1 A @ 24 VAC

      Ambient Temperature: 32 - 105 °F

      Circuit Breaker: 30 A, Maximum

      Controller Temperature Setting: 32 - 176 °F

      Enclosure Material: Polycarbonate

      Ground Fault Alarm: 20 - 200 mA

      Mounting: DIN Rail

      NEMA Rating: 12

      Output Relay: 24 A @ 120/208/240/277 +/-10% VAC: 50/60 Hz

      Power Consumption, Standby: 9 W

      Sensor Cable Length: 10 ft

      Sensor Temperature Range: -40 °F

      Sensor Tip Diameter: 0.2 in

      Sensor Type: Thermistor 2KΩ @ 77°F (25°C), 2-wire

      Supply Voltage: 120 - 277 V

      Temperature Alarm: 32 - 190 °F

    Teknisk specifikation
    • Unik ref.raychem-460-na
    • ProduktfamiljRaychem North America
    • ProduktgruppHeat Tracing - Pipe Freeze Protection; Flow Maintenance
    • TypObjekt (enstaka objekt)
    • Publiceringsdatum2020-07-31
    • Edition nummer1
    • Höjd (tum)90
    • Bredd (tum)210
    • Djup (tum)85
    Relaterad
    • HuvudmaterialPolykarbonat
    • Designad iUSA
    • Tillverkad iUSA
    Klassificering
    • BIMobjektkategoriElektricitet - kontroller
    • IFC klassificeringRegulator
    • ETIM kodEC002063
    • ETIM namnAccessories for heating cables
    • Uniclass 2015 kodPr_75_50_18_26
    • Uniclass 2015 beskrivningElectric trace heating control and monitoring panels
    • CSI MasterFormat 2014 Kod22 01 10
    • CSI MasterFormat 2014 TitelOperation and Maintenance of Plumbing Piping and Pumps
    • OmniClass nummer23-31 00 00
    • OmniClass TitelPlumbing Specific Products and Equipment
    • CSI UniFormat II KodD2090
    • CSI UniFormat II TitelOther Plumbing Systems

    Region tillgänglighet

    Nordamerika
    Kanada
    USA
    Common.Footer.ValueProp.Image.AltText

    Design App för Revit

    Ladda familjer direkt till din Revit-modell med ett klick

    Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

    • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
    • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
    • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit