Spain_B75_ResinaEpoxi_Imprimacion_AlsanEpoxi131
SOPREMA

Spain_B75_ResinaEpoxi_Imprimacion_AlsanEpoxi131

Two-component primer epoxy-water base of low viscosity and odorless that catalyzes with modified amines, inducing greater adhesion power on the support and achieving the optimum state of adhesion.

Specifikation
  • APPLICATION

    • Alsan® Epox 131 is used in polyurethane liquid waterproofing systems on humid substrates with humidity higher than 4%.
    • As a bonding bridge between liquid polyurethane membranes, if the bonding time between them has been exceeded.
    • Applicable on absorbent substrates such as concrete or mortar, wood, etc.
    • Applicable also on non-absorbent substrates such as ceramic tiles, metals, glass, old acrylic finishes or asphalt bases.
    • As a sealer of pores, joints, cracks and capillaries in concrete.
    • Not suitable when dealing with dampness from groundwater or capillarity, with a pressure > 1.5 N/mm.
Teknisk specifikation
  • Unik ref.PRDB75_22
  • Produktfamiljwaterproofing
  • ProduktgruppWaterproofing and insulation product
  • TypDigital Inventory (Products)
  • Publiceringsdatum2025-06-20
  • Edition nummer1
Relaterad
  • HuvudmaterialEpoxi
  • Designad iSpanien
  • Tillverkad iSpanien
Klassificering
  • BIMobjektkategoriByggnadsmaterial - Tätskikt
  • IFC klassificeringMaterial
  • ETIM kodEG020250
  • ETIM namnBuilding - chemical products
  • OmniClass nummer23-13 25 17
  • OmniClass TitelWaterproofing

Region tillgänglighet

Europa
Spanien
Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

  • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
  • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
  • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit