Ceiling (indoor unit) MMC-AP 024 027 8HP-E
TOSHIBA

Ceiling (indoor unit) MMC-AP 024 027 8HP-E

INDOOR UNIT CEILING TYPE FOR VISIBLE INSTALLATION, FOR VRF TYPE SYSTEM WITH VARIABLE REFRIGERANT FLOW RATE
REFRIGERANT R410A ,
Direct expansion multi-row battery with aluminium finned copper tubes.
N° 2 refrigerant filters on liquid and gas side to preserve the functioning of the electronic expansion valve and reduce noise.
Auto-cleaning system: the exchanger is coated with a special resin that allows the condensate water to clean it of any dust residues accumulated during operation.
Fan directly coupled to a three-speed single-phase induction motor, with electrical protection by means of a thermal switch.
Regenerable and washable synthetic fibre filter.
Pre-cut for primary air inlet.
Optional condensate drain pump.
In case of power failure of the machine, the remaining system continues to operate and reports the anomaly.

Specifikation
  • Technical details:
    - Avaible sizes: 1.7 - 2 - 2.5 - 3 - 4 - 5 - 6 (from 4,5 to 16,0 kW in cooling mode)
    - Full control on deflettore
    - 3 different refrigerator lines: from upper side, from back side and machine right side 
    - Drain-line: from 2 different directions
    - Self-cleaning function

Teknisk specifikation
  • Unik ref.pensile-a-soffitto-vrf-024-027
  • ProduktfamiljHVAC - Business VRF
  • ProduktgruppIndoor unit
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2019-04-15
  • Edition nummer1
Relaterad
  • HuvudmaterialMetall
Klassificering
  • BIMobjektkategoriVVS - Luftkonditionering
  • IFC klassificeringLuftterminal
  • UNSPSC namnAir conditioners
  • UNSPSC kod40101701
  • Uniclass 2015 kodEF_65_80
  • Uniclass 2015 beskrivningAir conditioning
  • CSI MasterFormat 2014 Kod23 36 00
  • CSI MasterFormat 2014 TitelAir Terminal Units
  • OmniClass nummer23-33 41 00
  • OmniClass TitelHVAC Air Terminals
  • CSI UniFormat II KodD30
  • CSI UniFormat II TitelHVAC

Region tillgänglighet

Europa
Italien

Liknande produkter

Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

  • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
  • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
  • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit