Publicera dina produkter

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

The Viking Corporation

Arkiverad

VK154 - Standard Response Dry Pendent Sprinklers (K5.6)

Viking Standard Response Dry Pendent Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces subject to freezing and supplied from a wet system in an adjacent heated area. The special Polyester and Electroless Nickel PTFE (ENT) coatings are listed/approved for installation in corrosive environments. Refer to technical data sheet for design and installation requirements.

Specifikation

K-Factor: K5.6 (80)
Manufacturer: Viking
Page: F_071591
Part Number: 07740U,07854U,09341,06530U,07853U,09342,07852U,07855U,09343
VK Number: VK154
Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).
Max Pressure: 175 psi (12 bar)
Response Type: Standard
Occupancy Type: Extra, Light, Ordinary
Thread Size: 1" NPT (25 mm BSP)
Min Spacing: 6 ft (1,8 m) cULus; Per FM datasheet
Max Spacing: Per Standards / Listings

Teknisk specifikation

Unik ref.vk154-standard-response-pendent-sprinkler-k56
ProduktfamiljViking Dry Barrel Sprinklers
ProduktgruppViking - Dry Pendent Adjustable Esc / Pendent
TypObjekt (enstaka objekt)
Publiceringsdatum2021-01-25
Edition nummer1

Länkar

Produkt-urlhttps://www.vikinggroupinc.com/vk150-vk151-vk154-vk155-vk158-vk159-standard-response-dry-pendent-sprinklers-k56
Produktcertifieringhttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf
Teknisk beskrivninghttps://www.vikinggroupinc.com/sites/default/files/documents/071591.pdf

Relaterad

Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriBrandskyddsprodukter - Sprinklersystem
ETIM kodEC011373
ETIM namnDry sprinkler
UNSPSC namnFire sprinkler heads
UNSPSC kod46191610
Uniclass 2015 kodPr_70_55_97_84
Uniclass 2015 beskrivningSprinkler heads
CSI MasterFormat 2014 Kod21 13 00
CSI MasterFormat 2014 TitelFire-Suppression Sprinkler Systems
OmniClass nummer23-29 33 11 11 13
OmniClass TitelDry Pendant Sprinkler Heads
CSI UniFormat II KodD4010
CSI UniFormat II TitelSprinklers

Liknande produkter

bild för Model 7500 - Pressure Gauge

AGF Manufacturing Model 7500 - Pressure Gauge

4.4 (59)

bild för Sprinkler Pipe Ring - Central Europe HVAC

Hilti Sprinkler Pipe Ring - Central Europe HVAC

4.6 (10)

bild för Model 5300A COLLECTanDRAIN - Auxiliary Drain

AGF Manufacturing Model 5300A COLLECTanDRAIN - Auxiliary Drain

bild för Model 2511T TESTanDRAIN - Single Handle Ball Valve

AGF Manufacturing Model 2511T TESTanDRAIN - Single Handle Ball Valve

bild för Model 7700 CORRinSITE Inline Pipe Corrosion Monitor

AGF Manufacturing Model 7700 CORRinSITE Inline Pipe Corrosion Monitor

bild för Wilkins FP51 Grooved Reducers

Zurn Wilkins FP51 Grooved Reducers

Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

Arbeta direkt med BIM-objekt bredvid Revit
2 GB molnlagring - lagra ditt Revit-innehåll
Få inbyggd kol-LCA (A1-A3) direkt från Revit