Vi använder cookies för att tillhandahålla våra tjänster

Genom att använda våra tjänster godkänner du att vi använder cookies

RHÉATHERM 600

Unique ref.: rheatherm-600
Tillverkare: VPI
Produktfamilj: ITE
Produktgrupp: Rhéatherm
Bredd (mm): 1200
Höjd (mm): 600
Datum för publicering: 2018-01-03
Versionsnummer: 3
Typ: Objekt (enstaka objekt)
Ladda ned (8)

RHEATHERM 600 is an External Thermal Insulation Composite System (ETICS) developped by Vicat Produits Industriels (VPI) which is made of a thin hydraulic undercoat containing fibres, reinforced with glass fibres meshes, and applied directly to the insulating panels of expanded polystyrene (white or graphite), bonded or mechanically fixed with anchors or by profile on the wall (concrete or masonry, new or existing walls). RHEATHERM 600 is consistent with the fire regulation by installing rockwool bands. Fit for all kinds of buildings (public-access building, collective dwelling, etc.).

Finishing is ensured by:
- a coating based on organic resin (CRÉPILOR), siloxane (LITHOCOLOR) or organo-siloxane (CRÉPILANE) available in 680 colors
- an acrylic binder paint (FLEXODERM) available in 680 colors,
- a thick mineral coating based on lime (RÉNOPASS CHAUX GF / GM, RHÉAJET) available in 59 colors.

Thermal insulation
Expanded polystyrene insulation thickness: bonded ETICS: 20 to 300 mm
Thermal resistance of the white expanded polystyrene panel: 0,50 to 7,90 m².K/W – Thermal conductivity: 0,038 W/(m.K)
Thermal resistance of the graphite expanded polystyrene panel: 0,60 to 9,65 m².K/W - Thermal conductivity: 0,031 W/(m.K)

Reaction to wind
Bonded ETICS: no limitation ; ETICS can be bonded with RHÉAMIX MONO (3,0 k/m²) or RHÉACOL PSE (4,0 k/m²).
Mechanically fixed ETICS: wind load resistance increases according the number of anchors and insulating thickness ; there is a need to increase the number of anchors on the singular points and the peripheral areas ; ETICS can be fixed with anchors noted in the ETE.


Reaction to fire
Classification A2-s1, d0 to B-s2, d0 according to finishing

Impact resistance
Categories III, II and I according to finishing and mesh types


Huvudmaterial: Insulation
Sekundärt material: Organic
Designad i: France
Tillverkad i: France

BIMobject kategori: Building Materials - Insulation
IFC-klassifikation: Building Element
UNSPSC-namn: Insulation
UNSPSC-kod: 3014
Uniclass 1.4 Kod: JM21
Uniclass 1.4 Beskrivning: Insulation with rendered finish
Uniclass 2.0 Kod: PR-45-64-26
Uniclass 2.0 Beskrivning: Expanded Polystyrene (Eps) Boards
Uniclass 2015 Kod: Pr_25_71_63_26
Uniclass 2015 Beskrivning: Expanded polystyrene (EPS) boards
NBS Reference Kod: 45-64-26
NBS Reference Beskrivning: Expanded Polystyrene (Eps) Boards
CSI MasterFormat 2014 Code: 07 24 00
CSI MasterFormat 2014 Title: Exterior Insulation and Finish Systems
OmniClass-nummer: 23-13 25 19 11 11 11
OmniClass-rubrik: Expanded Polystyrene Slab and Board Thermal Insulation
CSI UniFormat II Code: C3010
CSI UniFormat II Title: Wall Finishes
Den här produkten är tillgänglig i:
Europe
  • France

BIMobject SEEK Properties

Building Materials - Insulation

Namn Värde
Flame Spread Index Euroclass B-s2, d0 ; Euroclass A2-s1, d0
Installation Mechanically Attached ; Fully Adhered
Material EPS ; PSE ; Polystyrene
Thermal Insulance Lambda = 0,031 W/m·K ; Lambda = 0,038 W/m·K
Thermal Resistance 0.60 — 9.65 m²K/W
Thickness 20 mm — 300 mm

Alla BIM-objekt är riktiga produkter från riktiga tillverkare, bekräftade och godkända