Publicera dina produkter

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Combination Fill Valve and Backflow Preventers - 911

Series 911, 911S Combination Fill Valve and Backflow Preventers are for use in commercial and residential hydronic heating systems to provide make-up water to the boiler, and prevent backflow when supply pressure falls below system pressure. It consists of a brass Watts Model 9D backflow preventer and a bronze Watts Model 1156F feed water pressure regulator in one pre-assembled unit. Model 911 has union NPT x NPT connections. Model 911S has union solder x NPT connections. The Series 911, 911S has a high capacity fill valve that provides quick system filling and purging. It is designed for use in the boiler feed lines of hydronic heating systems. Maximum Pressure: 100psi (6.9 bar).

Specifikation

Keywords: assembly, backflow, backflow preventer valve, backflow valve, bronze body, bypass, cast iron, check valve, cover, dcda, detector, double, double check, doublecheck, epoxy coated, meter, pex crimping tools, pex tools, pressure valve, pressure zone valve, preventer, reduced pressure valve, repairkit, replacement, rpza, shut-off, steam, steamtrap, trap, valve, vlv, watts regulator, plumbing, drains, drainage, reduce pressure zone assembly

Teknisk specifikation

Unik ref.Combination-Fill-Valve-and-Backflow-Preventers-911
ProduktfamiljPlumbing & Flow Control Solutions
ProduktgruppHydronic & Steam Heating
TypObjekt (enstaka objekt)
Publiceringsdatum2019-03-08
Edition nummer2

Länkar

Relaterad

HuvudmaterialRostfritt stål
Designad iUSA
Tillverkad iUSA

Klassificering

BIMobjektkategoriRörläggning - Ventiler
Uniclass 2015 kodAc_10_40_63
Uniclass 2015 beskrivningPipe fitting
CSI MasterFormat 2014 Kod40 05 09
CSI MasterFormat 2014 TitelWall Pipes, Floor Pipes, and Pipe Sleeves
OmniClass nummer23-27 43 00
OmniClass TitelPipe Fittings
CSI UniFormat II KodC1030
CSI UniFormat II TitelFittings

Region tillgänglighet

Nordamerika
Kanada
USA

Liknande produkter

bild för Lead Free* Reduced Pressure Zone Assemblies - LF009

Watts Lead Free* Reduced Pressure Zone Assemblies - LF009

4.5 (33)

bild för 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

Watts 12 in. Square x 6 in. Deep Sanitary Floor Sink - FS-730

bild för Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

Watts Lead Free* Reduced Pressure Valve Assembly Backflow Preventers with Flood Sensor - Small Diameter 3/4 - 2 Inch Sizes - LF909-FS - Small

4.2 (12)

bild för Potable Water Expansion Tanks - PLT

Watts Potable Water Expansion Tanks - PLT

4.8 (18)

bild för Downspout Nozzle - RD-940

Watts Downspout Nozzle - RD-940

4.3 (15)

bild för Water Hammer Arrestors - 15M2

Watts Water Hammer Arrestors - 15M2

4.7 (21)

Common.Footer.ValueProp.Image.AltText

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

Arbeta direkt med BIM-objekt bredvid Revit
2 GB molnlagring - lagra ditt Revit-innehåll
Få inbyggd kol-LCA (A1-A3) direkt från Revit