500XLYSBR Water Pressure Reducing Valve with Wye Strainer
Wilkins

500XLYSBR Water Pressure Reducing Valve with Wye Strainer

The Pressure Reducing Valve shall be certified to NSF/ANSI/CAN 61, consisting of a low lead bronze body and bronze bell housing, a separate access cover for the plunger and a bolt to adjust the downstream pressure. The bronze bell housing and access cap shall be threaded to the body and shall not require the use of ferrous screws. The assembly shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions. The assembly shall be accessible for maintenance without having to remove the body from the line. The Pressure Reducing Valve shall be a WILKINS Model 500XLYSBR.

Compliance:

• ASSE® Listed 1003 (1/2” thru 2 1/2”)
• cUPC® Listed (1/2” thru 2”)
• CSA® Certified B356 (1/2” thru 2”)
• City of Los Angeles Approved (1/2” thru 2”)
• Meets the requirements of NSF/ANSI/CAN 61 and 372*
*(Less Than 0.25% Weighted Average Lead Content)

Features:

  • Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3"
  • Maximum working water pressure: 300 psi
  • Maximum working water temperature: 140° F
  • Reduced pressure range: 25 psi to 75 psi
  • Factory preset: 50 psi
  • Threaded connections (FNPT): ANSI B1.20.1
  • Copper connections (FC): ANSI B16.22
Specifikation
  • Wilkins model 500XLYSBR is designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The high flow capacity makes this device most suitable for industrial water lines and commercial water systems. The direct acting integral by-pass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes.

    keywords: Emergency and Public Entrance Areas, and Grounds,Healthcare,Boiler/Mechanical Rooms,Retail,Custodial Closets,Office,Commercial,Boiler Rooms and Custodial Areas,Hospitality,Industrial,Janitorial Closets/Custodial Closets,Manufacturing Floor,Spill Containment Area/Wash Down Area,Commercial Turf,Irrigation,Drip Irrigation,Residential/Commercial Irrigation,Green House,School Systems,Educational Facilities,Universities,Government Buildings,High Rise Buildings,Military,Parking Deck,Sports Complex/Recreational Center,Parking Lots,Turf/Field/Track,Residential Multi-Family,Residential/Light Commercial,Landscaping,Residential Single-Family,Outdoor Kitchen,Correctional/Institutional,Architectural/Aesthetics,Development,Civil,Roads,Sidewalks,Highways,Transportation,Interstates,Toll Road,Distribution,Waterworks,Pump Stations,Food Service,Industrial/Processing Plant,Parking/Garages,Pressure Reducing Valves,Lead-Free Products,Zurn Wilkins Water Control,Power Generation,Zurn Wilkins Pressure Reducing Valves,CA Mandatory Water Reduction,Lead-Free Law Compliance,MasterSpec,Retrofit and Replacement,Water Conservation,Zurn Wilkins,00XLYSBR,0XLYSBR,strainer,12-500XLYSBR,34-500XLYSBR,1-500XLYSBR,114-500XLYSBR,112-500XLYSBR,2-500XLYSBR

Teknisk specifikation
  • Unik ref.500XLYSBR
  • ProduktfamiljAdjusting/Controlling Valves for Liquid Services
  • ProduktgruppWater Pressure Reducing Valves
  • TypObjekt (enstaka objekt)
  • Publiceringsdatum2026-08-25
  • Edition nummer1
Relaterad
  • HuvudmaterialBronze
  • Designad iUSA
Klassificering
  • BIMobject-kategoriRörläggning - Ventiler

Region tillgänglighet

Nordamerika
Amerikanska Jungruöarna
Anguilla
Antigua och Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
British Virgin Islands
Caymanöarna
Costa Rica
Curaçao
Dominica
Dominikanska republiken
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kanada
Karibiska Nederländerna
Kuba
Martinique
Mexiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Christopher och Nevis
Saint Lucia
Saint Vincent och Grenadinerna
Saint-Barthélemy
Saint-Martin
Saint-Pierre-et-Miquelon
Sint Maarten
Trinidad och Tobago
Turks och Caicos Islands
USA
BIMobjects produktbibliotek

Design App för Revit

Ladda familjer direkt till din Revit-modell med ett klick

Få en plats för att enklare komma åt nya objekt, lagra dina Revit-familjer och samarbeta med ditt team.

  • BockmarkeringArbeta direkt med BIM-objekt bredvid Revit
  • Bockmarkering 2 GB molnlagring - lagra ditt Revit-innehåll
  • Bockmarkering Få inbyggd kol-LCA (A1-A3) direkt från Revit