Console Advantis AIR curve convex 2 operators

The Technical furniture for the Control Room shall be from the Advantis AIR series from GESAB brand or equivalent.

It must be specifically designed for 24/7 critical environments, complying with high ergonomic and durability requirements.

It must allow easy maintenance and cable management avoiding interference in the normal operation of the work position.

The structure must consist of a main central beam supported on technical side panels or cabinets, with the capacity to house connections, equipment, and cabling.

The work surface must be made in CDF (Compact Density Fiberboard).

The operator must have a personal connectivity area on the work surface, with a configurable space for power, data, and other connectors, accessible through a pivoting cover.

For the installation of the monitors, a fixing system for articulated arms shall be included to allows free positioning of the arm.

TECHNICAL ASPECTS

BEAM:

The structural Beam shall be manufactured in a single large format extruded 100% aluminum profile with external dimensions 250 x 88mm. The minimum profile thicknesses must be of 3.5mm to guarantee its strength.

Its construction must allow beam lengths up to 2800mm maximum (*3 operators per beam). The beam must integrate bottom access trays to support equipment to be installed. The minimum internal clearance of the empty beam shall be 227mm deep and 85mm high.

TECHNICAL CABINET:

The cabinets will be manufactured with the same material as the work surface to guarantee design uniformity, CDF (Compact Density Fibreboard) (>1.000 kg/m3) with a thickness of 16,5mm.

To guarantee structural stability, the joint between panels is made with aluminum profiles with a minimum 3.5mm thickness and coated with high resistance micro-textured powder paint finish.

All technical cabinets shall include, by default, a "Panduit" type cable channel measuring not less than 42x60x400mm. They must also include a connection channel with a capacity of up to 6

standard 45x45mm format connectors.

The pivoting doors, both at the front and at the rear of the technical cabinet shall incorporate hinges with a movement retention system, adjustable in 3 dimensions and with an opening angle of more than 105º, which shall guarantee a smooth and silent closing of the doors.

SURFACE:

The work surface must be made of 16.5 mm thick Compact Density Fibreboard, beveled and rounded at all contact points to avoid micro-traumas complying with the ISO11016.

WIRAIL:

All consoles shall integrate a WiRail ExtraFlat ergonomic arm management system that will allow the positioning of the ergonomic arms in any longitudinal position of the console that guarantees no need for milling nor drilling on the work surface.

The rail system shall have a very low profile and shall not protrude more than 13 mm from the work surface. It shall be made of aluminum sections with a minimum thickness of 3 mm to guarantee its strength.

TECHNICAL SIDE PANEL:

The frame must be made of 100% aluminum. The extruded aluminum alloy 6060/6063 parts must have a minimum thickness of 2.5 mm and must be joined to the corner pieces, which must be of cast aluminum, thus guaranteeing maximum structural rigidity and durability.

The central column must be made of a single large-format 100% aluminum profile with maximum external dimensions of 68.5x260x672mm (WxDxH) and a minimum profile thickness of 3.5mm.

The access must be enclosed by covers that can be opened with no need of special tools and must be of the same material and finish as the profile of the central column.

Access to the technical area must be from the inside face of the structure.

Lateral cable management capacity: Total free space of the technical area 253mm wide x 66mm deep.

QUALITY AND WARRANTY

Both national (EU) design and manufacture must be guaranteed. With leading suppliers in each sector to guarantee the highest quality standards and an exhaustive internal control throughout the process from design to assembly.

CERTIFICATES OF EXCELLENCE

ISO 9001 / ISO 14001 / ISO 45001

The company manufacturing the product must be certified by an accredited body in ISO 9001, 14001 and 45001 in order to guarantee the highest standards in quality, environmental management and health and safety.

The warranty period of the products shall be extended for a period of at least TEN YEARS against manufacturing defects, except for accessories, components and mechanical, electrical and electronic elements that the system or product incorporates, whose warranty period shall be at least two years.

HEALTH AND ERGONOMICS

The console must be certified in the UNE-EN 527 standard by an accredited external company.

A certificate shall be submitted with the project documentation.

It shall also comply with the guidelines of UNE-EN ISO 11064: ERGONOMIC DESIGN OF CONTROL CENTRES.

SOFTWARE AND FORMATS

The furniture must have 3D families in REVIT (.rfa) and 3D STUDIO MAX (.fbx and .max) formats, for its integration in the technical documentation of the project.

SUSTAINABILITY AND ENVIRONMENTAL HEALTH

The ability to repair and replace any part, as well as quality and durability are effective eco-design strategies. The use of materials with high recyclability and the use of materials with a high percentage of already recycled material shall be ensured.

The repairability and replaceability of all components of the consoles shall be guaranteed for the lifetime of the product.

The manufacturer shall certify 80% already recycled aluminium in all aluminium extrusion and cast parts and 70% in steel parts.

The GREENGUARD FOR LOW CHEMICAL EMISSIONS UL 2818-2013

Standard for Chemical Emissions for Building Materials, Finishes and Furnishings certificate will be presented.

This certificate ensures that the products used in the manufacture of the console meet strict emission limits for particulate matter and chemicals harmful to the human body, helping to reduce indoor air pollution and the risk of chemical exposure, while contributing to healthier indoor environments.