Publiko produktet
GPS time receiver
ABB

GPS time receiver

For the reception and processing of the GPS signal, as well as for brightness and temperature measurement. The sensor measures the brightness and outside temperature and sends them on the KNX bus. Likewise the time, date and geographical coordinates are send to the KNX bus. Additionally the sunrise and sunset times are also send to the bus. With integrated Bus Coupler.

Özellikler
  • The Time Receiver GPS is a surface mounted device. Physical address assignment and device parameterization are carried out using ETS and the current application.
    The TR/A 1.1 is powered via the ABB i-bus® and does not require an additional auxiliary voltage supply.  The device is ready for operation after connecting the bus voltage.
    The Time Receiver GPS is used to receive the current time and to send it on the KNX bus. This allows the Time Receiver GPS to act as the internal clock for every time switch or also for devices with timedependent logic. Furthermore, its integrated brightness and temperature sensor can transmit additional exterior conditions on the KNX bus

Teknik özellikler
  • Benzersiz ref.GPS-time-receiver
  • Ürün ailesiTime Switcher
  • Ürün grubuAutomation, Logic and Time Control
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-12-21
  • Baskı numarası1
  • Yükseklik (mm)40
  • Genişlik (mm)89.5
  • Derinlik (mm)75
İlgili
  • Ana malzemePlastik
  • İkincil malzemeMetal
Sınıflandırma
  • BIMobject kategorisiElektrik - Controls
  • Uniclass 2015 koduPr_75_50_76_03
  • Uniclass 2015 açıklamasıAir temperature sensors
  • CSI MasterFormat 2014 kodu26 22 19
  • CSI MasterFormat 2014 başlığıControl and Signal Transformers
  • OmniClass numarası23-37 17 13
  • OmniClass başlığıSignal Devices
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin