MB-SLIMLINE Window 2-sash Tilt and Turn - Sidehung
Aluprof

MB-SLIMLINE Window 2-sash Tilt and Turn - Sidehung

Highly insulated, MB-Slimline window system with thermal break is intended for fabrication of external  structure elements such as various types of highly resistant, inward-openable windows (side-hung, hopper, tilt-and-turn windows) and fixe windows of an excellent water resistance, air tightness, and sound insulation performance. With its very small-width aluminium profiles, visible from the external side of the construction, MB-Slimline enables to fabricate casements in two variants – with visible or invisible profiles (SG) from the external side of the structure. When invisible casements are used, the appearance of openable and fixed units is almost identical. This system can also greatly replace the old-style windows, made of steel profiles and maintain a similar appearance from the outside of the construction, while significantly increasing the thermal insulation of the partition.

Özellikler
  • Features and benefits MB-SLIMLINE:

    • high resistance to water & air infiltration plus an excellent thermal insulation can be obtained thanks to the special shape of the central gasket
    • good thermal insulation Uw from 0,8 W/(mK)
    • important glazing range, up to 81 mm
    • the use of typical “Euro” grooves enables installation of most of the available fittings
    • the construction method is maximally simplified. Profile connections (corner & T-connections) are performed by bolting or studding

    Technical parameters:
    • Air permeability: class 4, EN 1026:2001; EN 12207:2001
    • Watertightness: classE 1500, EN 1027:2001; EN 12208:2001
    • Thermal insulation: (Uw): from 0,8 W/(m2K)
Teknik özellikler
  • Benzersiz ref.MB-SLIMLINE_window_2sash_tilt_and_turn_sidehung
  • Ürün ailesiWindows & Doors
  • Ürün grubuMB-SLIMLINE windows
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2021-09-10
  • Baskı numarası1
İlgili
  • Ana malzemeAlüminyum
  • İkincil malzemeCam
  • Tasarım yeriPolonya
  • Üretim yeriPolonya
Sınıflandırma
  • BIMobject kategorisiPencereler - Pencereler
  • IFC sınıflandırmasıPencere
  • UNSPSC adıWindows
  • UNSPSC kodu301716
  • Uniclass 1.4 koduJL10
  • Uniclass 1.4 açıklamasıWindows
  • Uniclass 2.0 koduPR-59-97
  • Uniclass 2.0 açıklamasıWindows
  • Uniclass 2015 koduEF_25_30
  • Uniclass 2015 açıklamasıDoors and windows
  • NBS referans kodu59-97
  • NBS referans açıklamasıWindows
  • CSI MasterFormat 2014 kodu08 51 13
  • CSI MasterFormat 2014 başlığıAluminum Windows
  • OmniClass numarası23-17 13 00
  • CSI UniFormat II koduB2020
  • CSI UniFormat II başlığıExterior Windows

Bölge bulunurluk durumu

Europe Asia Africa North America
Rusya
Türkiye
Kenya
Kanada
Finlandiya
Gürcistan
Birleşik Devletler
İsveç
Azerbaycan
Dominik Cumhuriyeti
Norveç
İran
Küba
İngiltere
Suudi Arabistan
Haiti
İrlanda
Kuveyt
Jamaika
İspanya
Birleşik Arap Emirlikleri
Porto Riko
Portekiz
Katar
Bahamalar
Fransa
Hollanda
Danimarka
Almanya
Belçika
Estonya
Litvanya
Letonya
Beyaz Rusya
Ukrayna
Slovakya
Polonya
Çek Cumhuriyeti
İsviçre
İtalya
Macaristan
Avusturya
Sırbistan
Slovenya
Hırvatistan
Bosna Hersek
Karadağ
Romanya
Moldova
İzlanda