Publiko produktet
ARDEX A 35 MIX - Pre-Blended Ultra Rapid Drying Cement for Internal Screeds
ARDEX A 35 MIX - Pre-Blended Ultra Rapid Drying Cement for Internal Screeds
ARDEX A 35 MIX - Pre-Blended Ultra Rapid Drying Cement for Internal Screeds
ARDEX A 35 MIX - Pre-Blended Ultra Rapid Drying Cement for Internal Screeds
    ARDEX

    ARDEX A 35 MIX - Pre-Blended Ultra Rapid Drying Cement for Internal Screeds

    ARDEX A 35 MIX is a pre-blended mix of ARDEX A 35 cement and graded sands to produce ultra-rapid drying floor screeds which can be walked on after just 3 hours and floorcoverings installed in as little as 4 hours, regardless of thickness. Use ARDEX A 35 MIX for bonded, unbonded and floating screeds in internal locations.

    • Pre-blended with graded sand for convenience – just add water
    • Walk on after 3 hours
    • Receives ceramic and natural stone tiles directly after only 24 hours
    • Install carpet, wood and vinyl floorcoverings after 24 hours, or just 4 hours for carpet and vinyl when smoothed with ARDEX A 55
    • Passes BRE Screed (ISCR) Testing after 6 hours
    • After just one day, achieves the acceptable minimum compressive and tensile bending strengths attained by an ordinary cement screed after 28 days

    Unit Size Available: 25kg

    Coverage: Approximately 0.5m2 at 25mm thick per 25kg unit

    Özellikler
    • Working time at 20°C - approx. 60 minutes Walkability at 20°C - approx. 3 hours COMPRESSIVE STRENGTH - After 28 days 40.0 N/mm² TENSILE BENDING STRENGTH - After 28 days 7.0 N/mm² SOUNDNESS (BRE SCREED TEST) - Normally after 6 hours
    Teknik özellikler
    • Benzersiz ref.Ardex-a-35-mix
    • Ürün ailesiTile & Stone Installation System
    • Ürün grubuScreeds/Mudbeds
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2019-08-26
    • Baskı numarası1
    İlgili
    • Ana malzemeÇimento
    • Tasarım yeriİngiltere
    • Üretim yeriİngiltere
    Sınıflandırma
    • BIMobject kategorisiZemin Kaplama - Tiles
    • IFC sınıflandırmasıFloor
    • UNSPSC adıFlooring
    • UNSPSC kodu301617
    • Uniclass 2015 koduEF_30_20
    • Uniclass 2015 açıklamasıFloors
    • CSI MasterFormat 2014 kodu09 60 00
    • CSI MasterFormat 2014 başlığıFlooring
    • OmniClass numarası23-15 17 13 13
    • OmniClass başlığıTile Flooring
    • CSI UniFormat II koduC3020
    • CSI UniFormat II başlığıFloor Finishes

    Bölge bulunurluk durumu

    Avrupa Asya
    Avusturya
    Singapur
    Çek Cumhuriyeti
    Tayland
    Danimarka
    Fransa
    İngiltere
    İrlanda
    İsveç
    Polonya
    Rusya
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin