Publiko produktet

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

ARDEX IFS MIX - Self-leveling mortar in medium and thick layer for continuous floors in industrial areas

Powder based on special cements and plasticizers with good dispersion capacity and special fillers. Mixed with water, a smooth, self-leveling and pumpable mortar is obtained, which is workable 1/2 hour and passable in 2 hours. The mortar dries and hardens by hydration, without shrinkage, preventing the appearance of cracks.

Özellikler

Mixing ratio: Approx. 4 l. of water for 25 kg. of powder, which corresponds to approximately 1 vol. of water: 4 vol. of dust Density: Approx. 1.5 Kg / l. Density of the fresh mortar: Approx. 2.1 Kg / l. Material consumption: Approx. 1.7 Kg. Powder / m2 / mm. Open time: Approx. 25 minutes (at 20 ° C) Workability time (+ 20 ° C): Approx. 1/2 hour Sealing protection with ARDEX-COAT: After the pouring of the mortar Up to 10 mm: 1 day Up to 30 mm: 3 days Compressive strength: After 1 day: approx 14.0 N / mm2 After 7 days: approx 21.0 N / mm2 After 28 days: approx 32.0 N / mm2 Resistance to the flexotraction: After 1 day: approx 3.8 N / mm2 After 7 days: approx 5.5N / mm2 After 28 days: approx 8.8 N / mm2 Brinell Hardness: After 1 day approx. 63 N / mm2 After 7 days: approx 68 N / mm2 After 28 days: approx 95 N / mm2 Suitable furniture with wheels: Yes Packaging: Sacks of 25 kg. Net Storage: Approx. 12 months in dry places and in its original closed container.

Teknik özellikler

Benzersiz ref.ARDEX-IFS-MIX
Ürün ailesiSubfloor Preparation
Ürün grubuThicker Layer High Build Self-Leveling Underlayment
TipObje (Tekil Nesne)
Yayınlanma tarihi2019-11-07
Baskı numarası1

Bağlantılar

Ürün URL’sihttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html
Teknik açıklamahttp://www.ardex.es/es/productos/morteros-autonivelantes/ifs-mix.html

İlgili

Ana malzemeMortar
Tasarım yeriİspanya
Üretim yeriİspanya

Sınıflandırma

BIMobject kategorisiZemin Kaplama - Kaba döşeme
IFC sınıflandırmasıFloor
UNSPSC adıCarpet or rug underlays
UNSPSC kodu30161719
Uniclass 2015 koduPr_35_31_06_80
Uniclass 2015 açıklamasıSmoothing and levelling underlay compounds
CSI MasterFormat 2014 kodu06 16 26
CSI MasterFormat 2014 başlığıUnderlayment
OmniClass numarası23-15 17 11 13 11 13
OmniClass başlığıPortland Cement Floor Underlayments
CSI UniFormat II koduB1010
CSI UniFormat II başlığıFloor Construction

Bölge bulunurluk durumu

Avrupa
Fransa
İspanya

Benzer ürünler

ARDEX PC-T™ Polished Concrete Topping için görüntü

ARDEX ARDEX PC-T™ Polished Concrete Topping

4.0 (5)

ARDEX FL™ Rapid Set, Flexible, Sanded Grout için görüntü

ARDEX ARDEX FL™ Rapid Set, Flexible, Sanded Grout

$ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant için görüntü$

ARDEX ARDEX installation for Gauged Porcelain Tile, Panels and slabs with 2 component waterproof, antifracture, mortar, grout and sealant

ARDEX K 530™ Decorative Concrete Toping için görüntü

ARDEX ARDEX K 530™ Decorative Concrete Toping

ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar için görüntü

ARDEX ARDEX X 3™ PLUS - Large and Heavy Tile and Stone Mortar

ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping için görüntü

ARDEX ARDEX SD-T® Self-Drying, Self-Leveling Concrete Topping

Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

Doğrudan Revit'in yanındaki BIM nesneleriyle çalışın
2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin