Publiko produktet
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia
    ARDEX

    ARDITEX NA Ultra Rapid Setting Latex Subfloor Levelling and Smoothing Compound - No Ammonia

    ARDITEX NA Levelling and Smoothing Compound saves you both time and money by removing the need for intensive preparation and priming. Its renowned versatility and advanced site tolerance reduces preparation machinery hire costs, lost time and call backs, helping to ensure that with ARDITEX NA, there really is no alternative.

    • Apply direct to most substrates without priming, including old adhesive residues and bitumen, flooring grade plywood, ARDEX
    • Damp Proof Membranes and even direct to ceramic tiling
    • Unaffected by moisture and can be used direct over damp concrete 
    • Install floorcoverings after 4 hours and ceramic tiles after 3 hours
    • Walk on after 2 hours
    • Convenient bag and bottle mix with no measuring or water required
    • Advanced performance, even at lower temperatures
    • Suitable for use with underfloor heating
    • The Original Yellow Bag ® 

    Unit Size Available: 20kg Powder & 4.85kg Latex 

    Coverage: Approximately 5m²

    Özellikler
    • Bulk density of powder approx. 1.3kg/litre 
      Initial Set (Vicat) approx. 1 hour 
      Final Set (Vicat) approx. 11/2 hours 
      Compressive Strength After 28 days approx. 16 N/mm² 
      Flexural Strength After 28 days approx. 5.5 N/mm² 
      Indentation Resistance 24 Hours 15N/mm² 7 days 25N/mm² 
      Typically floorcoverings range between 0.5 - 6N/mm²

    Teknik özellikler
    • Benzersiz ref.Arditex-NA
    • Ürün ailesiSubfloor Preparation
    • Ürün grubuTwo Component, Self-Leveling Underlayment
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2019-08-26
    • Baskı numarası1
    İlgili
    • Ana malzemeDiğer
    • İkincil malzemeDiğer
    • Tasarım yeriİngiltere
    • Üretim yeriİngiltere
    Sınıflandırma
    • BIMobject kategorisiZemin Kaplama - Kaba döşeme
    • IFC sınıflandırmasıFloor
    • Uniclass 2015 koduPr_35_31_06
    • Uniclass 2015 açıklamasıBedding and underlay compounds
    • CSI MasterFormat 2014 kodu06 16 26
    • CSI MasterFormat 2014 başlığıUnderlayment
    • OmniClass numarası23-15 17 11 13 11 13
    • OmniClass başlığıPortland Cement Floor Underlayments
    • CSI UniFormat II koduB1010
    • CSI UniFormat II başlığıFloor Construction

    Bölge bulunurluk durumu

    Okyanusya Avrupa Asya
    Avustralya
    Fransa
    Tayland
    Yeni Zelanda
    İngiltere
    İrlanda
    İspanya
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin