Hizmetlerimizi kullanarak çerezlerin kullanımını kabul edersiniz here !

I agree
;

Condair ME - Evaporative Humidifier & Cooler

Özgün ref.: condair-humidifier-meseries
Marka: Condair
Ürün ailesi: Air Humidifiers
Ürün grubu: Evaporative Cooler
Yayınlanma tarihi: 2017-01-19
Sürüm: 1
Tip: Obje (Tekil Nesne)
indirme (10)
The Condair ME provides low energy humidity control and evaporative cooling to an air handling unit or duct.

A single unit can provide up to 1,000kg/hr of humidification and 630kW of evaporative cooling to an air stream while operating on less than 0.3kW of electricity. As well as being economic to run the Condair ME is also easy to operate with an advanced touch screen control panel, simple to maintain with industry leading service features and employs the latest in hygiene technology.

The self-contained hydraulic unit supplies water to the top of the evaporative module, located either inside or outside the duct. Exterior mounting enables most servicing to be carried out without having to shut down and enter the air handling unit.

The Condair ME incorporates up to five low energy 32W pumps rather than single large pump. This allows proportional energy consumption to system output and provides up to five-stage control as standard.

Evaporative humidifiers provide instant humidification without any aerosols in the AHU. This means they can be situated in short section lengths without the risk of wetting on bends. As minerals left behind after evaporation are regularly sent to drain, service requirements are considerably less than steam humidification.

Features and benefits
  • High humidification & cooling duties from a single unit
  • Very low energy consumption
  • Instant evaporation requiring very short section length
  • In-duct or externally mounted hydraulic unit
  • Up to five stage control as standard
  • Advanced touch screen control panel


Ana malzeme: Stainless steel
İkincil malzeme:
Tasarım yeri:
Üretim yeri:

BIMobject Kategorisi: HVAC - HVAC (Isıtma Havalandırma İklimlendirme)
IFC sınıflandırması: Evaporative Cooler
OmniClass Numarası: 23-33 45 00
OmniClass Başlığı: HVAC Coolers
Bu ürün burada mevcut:
Africa
  • Angola
  • Botswana
  • Mozambique
  • Namibia
  • South Africa
  • Zimbabwe
Asia
  • China
  • India
  • Indonesia
  • Japan
  • Malaysia
  • Pakistan
  • Singapore
  • South Korea
  • Thailand
Europe
  • Austria
  • Belgium
  • Bulgaria
  • Croatia
  • Czech Republic
  • Denmark
  • Estonia
  • Finland
  • France
  • Germany
  • Greece
  • Hungary
  • Iceland
  • Ireland
  • Italy
  • Latvia
  • Lithuania
  • Netherlands
  • Norway
  • Poland
  • Romania
  • Serbia
  • Slovenia
  • Spain
  • Sweden
  • Switzerland
  • Ukraine
  • United Kingdom
Middle East
  • Egypt
  • Israel
  • Jordan
  • Lebanon
  • Saudi Arabia
  • Syria
  • Turkey
  • United Arab Emirates
Oceania
  • Australia
South America
  • Argentina
  • Chile
  • Peru
  • Uruguay

BIMobject SEEK Properties

HVAC - Other

İsim Değer
Description Adiabatic Evaporative Humidifier and Cooler
Frequency 50 Hz — 60 Hz
Phase 1
Voltage 230 V

COBie UK

UK.COBie.Component

UK.COBie.Component

This property set allows objects to be COBie UK BIM Level 2 classified

İsim Değer
Description Adiabatic Evaporative Humidifier and Cooler
UK.COBie.Type

UK.COBie.Type

This property set allows objects to be COBie UK BIM Level 2 classified

İsim Değer
Description Adiabatic Evaporative Humidifier and Cooler

Condair

Properties

İsim Değer
Control signals 0-5 VDC<br/>1-5 VDC<br/>0-10 VDC<br/>2-10 VDC<br/>0-16 VDC<br/>3.2-16 VDC<br/>0-20 mA<br/>4-20 mA<br/>On/Off (via volt-free contact)
Supply voltage control unit 100...240 VAC/50...60 Hz<br/>24 Vdc/50...60 Hz
Admissible operating air temperature 10-60 °C (50-140 °F)
Admissible ambient temperature - optional control unit 1-40 °C (33.8-104 °F)
Admissible water supply pressure 2-5 bar (29-72.5 psi)
Max. admissible matrix face velocity 3.5 m/s (689 fpm)<br/>4.5 m/s (886 fpm) with droplet separator
Admissible water temperature 5-20 °C (41-68 °F)
Conformity CE marking
Control accuracy Control accuracy depends on air conditions, control distance, water quality and on the number of On/Off cycles
Fire classification of evaporative media Glass fibre media: A2-S2,-D0 (UL 900)<br/>Polyester media: DIN EN 53438 Class F1 (UL 900)
Degree of protection of optional control unit IP21
Degree of protection of optional valves IP42
Admissible ambient humidity - optional control unit max. 75 %rh
Water quality Tap water, softened or fully demineralised water with a max. of 100 cfu/ml
Water drain - outside diameter ø 54 mm (2.125") - Tank /<br/>ø 28 mm (1.125") - Hydraulic module
Water supply ø15mm (0.625") compression fitting

BIMobject®