Publiko produktet
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety
Optio PGM Ventilation Controller for CO / NO2 Safety

    Optio PGM Ventilation Controller for CO / NO2 Safety

    Conspec’s parking garage Carbon Monoxide & Nitrogen Dioxide detector system initiates exhaust fans and/or alarms when Carbon Monoxide and or Nitrogen Dioxide levels become unsafe. Easy installation and setup make this detector the preferred choice for CO & NO2 detection in parking garages.

    CONSPEC's Optio PGM ventilation fan controller is designated for parking areas where Carbon Monoxide & Nitrogen Dioxide gases must be continually ventilated or have a gas detection device installed. Before an unsafe level of Carbon Monoxide and or Nitrogen Dioxide is reached, the detector will signal ventilation fans to cycle and operate until the atmosphere in the area has returned to normal.

    Multiple detectors can be installed and easily connected without the need for a central panel/controller by a simple series connection of the detectors. LED indicator lights clearly show the status of the detector, and a large LCD display continually shows the CO & NO2 levels being monitored. In the event of a power loss or malfunction, the Optio PGM activates the ventilation system.

    Electricity and heating expenses can be dramatically reduced due to the ventilation fans operating only when needed as opposed to continuously running. Energy savings of up to 85% can be achieved and in most cases, the return on the cost of the system is realized in one year or less! Contact Conspec Controls for the cost savings you can achieve.

    Gases Detected

    • Carbon Monoxide CO
    • Nitrogen Dioxide NO2

    Features

    • Long sensor Life
    • Self Diagnostic
    • Automatic reset after power loss
    • Two (2) Onboard Relay Contacts
    • Two (2) 4-20mA Outputs (Optional)
    • Onboard 85db Alarm
    • Bright LCD Display
    • Nitrogen Dioxide sensor can be internal or remotely located up to 100ft
    • Compliant to California Title 24 (when used with Primus V Controller)
    • UL61010-1 Approved
    • UL2075 Approved (pending)

    Applications

    • Enclosed Parking Garages
    • Vehicle Maintenance Facilities
    • Factories / Warehouses
    • Bus Terminals & Depots
    • Tunnels
    • Car Dealerships
    • Fire/Police Stations
    • Service Bays

    Accessories

    • Primus V Controller
    • Horns and Strobes
    • Calibration Kits
    • Replacement Sensor CO
    • Replacement Sensor NO2
    • Power Supply
    • IR Remote
    Teknik özellikler
    • Benzersiz ref.optio-pgm-gas-detector
    • Ürün ailesiFire Protection Products
    • Ürün grubuGas Detectors
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2024-06-27
    • Baskı numarası1
    İlgili
    • Ana malzemePlastik
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiYangın Ürünleri - Yangın koruması
    • IFC sınıflandırmasıAlarm
    • ETIM KoduEC002455
    • ETIM AdıGas detector
    • Uniclass 2015 koduPr_75_50_76_33
    • Uniclass 2015 açıklamasıGas detectors
    • CSI MasterFormat 2014 kodu28 33 00
    • CSI MasterFormat 2014 başlığıGas Detection and Alarm
    • OmniClass numarası23-27 11 27 17
    • OmniClass başlığıGas Detectors

    Bölge bulunurluk durumu

    Kuzey Amerika
    Anguilla
    Antigua ve Barbuda
    Aruba
    Bahamalar
    Barbados
    Belize
    Bermuda
    Birleşik Devletler
    Caribbean Netherlands
    Cayman Adaları
    Curaçao
    Dominik
    Dominik Cumhuriyeti
    El Salvador
    Grenada
    Grönland
    Guadeloupe
    Guatemala
    Haiti
    Honduras
    İngiliz Virjin Adaları
    Jamaika
    Kanada
    Kostarika
    Küba
    Martinique
    Meksika
    Montserrat
    Nikaragua
    Panama
    Porto Riko
    Saint Barthélemy
    Saint Kitts ve Nevis
    Saint Lucia
    Saint Martin
    Saint Pierre ve Miquelon
    Saint Vincent ve Grenadines
    Sint Maarten
    Trinidad ve Tobago
    Turks ve Caicos Adaları
    Virjin Adaları
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin