Publiko produktet
2641 Sequential mechanical basin mixer
2641 Sequential mechanical basin mixer
    DELABIE
    Arşivlendi

    2641 Sequential mechanical basin mixer

    Wall-mounted sequential mechanical basin mixer. Sequential mechanical mixer: opens and closes with cold water, with 70° turning range. Wall-mounted mixer with swivelling under spout L. 200mm with hygienic BIOSAFE outlet. Spout suitable for fitting a BIOFIL point-of-use filter. Spout can be easily fixed in place. Securitouch thermal insulation prevents burns. Ø 35mm standard ceramic cartridge with pre-set maximum temperature limiter. Body and spout with narrow tubes with smooth interiors and very low water volume. The speed that the water flows through these tubes reduces the development of biofilm considerably. Thermal shocks are possible without removing the control lever or shutting off the cold water supply. Flow rate regulated at 4 lpm. Chrome-plated brass body. Hygiene control lever L. 150mm requires no manual contact. Mixer with 150mm centres supplied with offset STOP/CHECK wall connectors M1/2" M3/4" ideal for hospitals. Recommended installation height: 110 - 200mm above the basin surface. Mechanical mixer ideal for healthcare facilities, retirement and care homes, hospitals and clinics. Sequential mixer suitable for people with reduced mobility. Mixer with 30-year warranty.
    Teknik özellikler
    • Benzersiz ref.2641
    • Ürün ailesiSanitary
    • Ürün grubuBasin mixer
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2021-06-11
    • Baskı numarası1
    • Yükseklik (mm)175
    • Genişlik (mm)215
    • Derinlik (mm)282
    İlgili
    • Ana malzemePirinç
    • Tasarım yeriFransa
    • Üretim yeriFransa
    • Ağırlık net (Kg)1959
    Sınıflandırma
    • BIMobject kategorisiHijyenik - Musluklar/ Bataryalar
    • IFC sınıflandırmasıHijyen Terminali
    • ETIM KoduEC011328
    • ETIM AdıWashbasin mixing tap
    • Uniclass 2015 koduPr_40_20
    • Uniclass 2015 açıklamasıSanitary fittings and accessories
    • CSI MasterFormat 2014 kodu41 14 33
    • CSI MasterFormat 2014 başlığıMixers
    • OmniClass numarası23-31 11 00
    • OmniClass başlığıFaucets
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin