Publiko produktet
LCS-350 + ERS HR 60E1-SS 1:40 Examples
LCS-350 + ERS HR 60E1-SS 1:40 Examples
    edilon)(sedra

    LCS-350 + ERS HR 60E1-SS 1:40 Examples

    This is a combined example of the edilon)(sedra LCS-350 precast concrete slab with an edilon)(sedra Corkelast® ERS (Embedded Rail System). In this case an ERS HR 60E1-SS 1:40 132-149 is shown as the rail system.

    In the model, two alternative configurations are presented. In one configuration, two slabs of 3 m length each are arranged sequentially. The other configuration follows the same layout but utilizes slabs with a length of 4 m. The joint sealant between the slabs is not represented, as it will be defined according to the specific project requirements.

    Özellikler
    • edilon)(sedra LCS-350 precast slab with ERS HR 60E1-SS 1:40

      3 & 4 m slab examples

    Teknik özellikler
    • Benzersiz ref.lcs-350-ers-hr-60e1-ss-1-40-examples
    • Ürün ailesiLCS x ERS
    • Ürün grubuLevel Crossing System + Embedded Rail System
    • TipAssembly (Çoklu Nesneler)
    • Yayınlanma tarihi2026-05-22
    • Baskı numarası1
    İlgili
    • Tasarım yeriHollanda
    Sınıflandırma
    • BIMobject kategorisiMühendislik ve Altyapı - Demiryolu
    • IFC sınıflandırmasıKorkuluk
    • Uniclass 2015 koduSs_25_36_70
    • Uniclass 2015 açıklamasıRailway crossing systems
    • CSI MasterFormat 2014 kodu34 72 00
    • CSI MasterFormat 2014 başlığıRailway Construction
    • OmniClass numarası23-39 15 00
    • OmniClass başlığıRailways

    Bölge bulunurluk durumu

    Avrupa
    Belçika
    Danimarka
    Hollanda
    İngiltere
    İsveç
    Norveç
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin