Publiko produktet
Point of Use Low Flow Heaters
Eemax
Arşivlendi

Point of Use Low Flow Heaters

  • On demand hot water - no delay
  • Cut energy waste - Flow switch activates heater only when water is running, no standby heat loss
  • 99% Efficient, .99 energy factor
  • Endless hot water - No storage capacity to deplete
  • Reduces installation cost and material - No T&P valve required (check local codes)
  • Flow restricting aerator - PCA ensures proper volume and effective flow.
  • Easy Installation - Simple compression fittings that require no soldering. Unit mounts directly to the wall with common hardware.
  • Prevents Legionella bacteria growth
  • Reduces calcification and sedimentation
  • Field Serviceable - All major component are field replaceable and readily available
  • Proudly made In the USA

Teknik özellikler
  • Benzersiz ref.eemax-001
  • Ürün ailesiHVAC
  • Ürün grubuInstantaneous Water Heaters
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2018-07-30
  • Baskı numarası1
  • Yükseklik (inç)10.75
  • Genişlik (inç)5.25
  • Derinlik (inç)2.88
İlgili
  • Ana malzemePlastik
  • İkincil malzemeMetal
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiSıhhi tesisat - Water heaters
  • IFC sınıflandırmasıIsı Eşanjörü
  • Uniclass 2015 koduPr_60_60_96_27
  • Uniclass 2015 açıklamasıElectric instantaneous water heaters
  • CSI MasterFormat 2014 kodu22 33 13
  • CSI MasterFormat 2014 başlığıInstantaneous Electric Domestic Water Heaters
  • OmniClass numarası23-31 29 11 11
  • OmniClass başlığıElectric Instantaneous Hot Water Heaters
  • CSI UniFormat II koduD30
  • CSI UniFormat II başlığıHVAC
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin