Publiko produktet
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto
Lawn Saving System Lawn Svelto

    Lawn Saving System Lawn Svelto

    The polyethylene grating is the system consisting of high-density modules with a honeycomb design. It is the green idea that respects the environment, for the construction of car parks, driveways, driveways and parking areas.

    Özellikler
    • This system, consisting of high-density polyethylene modules with a honeycomb design, is conceived as an environmentally sustainable solution for the construction of car parks, driveways, driveways and parking areas.
      This ‘green’ approach not only respects the environment, but also helps mitigate flooding in urban areas by allowing rainwater to infiltrate naturally into the ground, unlike impermeable surfaces such as concrete or asphalt. Furthermore, the integration of grassy areas in urban centres favours the creation of natural habitats for insects and small animals, as well as providing aesthetic and recreational benefits.
      With this lawn-saving system, soil consolidation is achieved through a lawn that can be immediately used by vehicles and only requires normal cultivation care. The surface area covered by grass in the Svelto Lawn is approximately 90 per cent, promoting rainwater drainage.
      This system guarantees high compressive strength values depending on the type of soil underneath, the substrate and the relative thicknesses. Furthermore, thanks to the HDPE material, the honeycomb modules are resistant to atmospheric agents, temperature variations and the damaging effects of UV rays, while remaining immune to the attack of microorganisms and chemicals present in the soil or used for turf care.

    Teknik özellikler
    • Benzersiz ref.lawn-saving-system-lawn-svelto
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2026-05-13
    • Baskı numarası1
    İlgili
    • Tasarım yeriİtalya
    • Üretim yeriİtalya
    Sınıflandırma
    • BIMobject kategorisiZemin Kaplama - Döşeme Sistemleri

    Bölge bulunurluk durumu

    Avrupa
    Åland
    Almanya
    Andorra
    Arnavutluk
    Avusturya
    Belçika
    Beyaz Rusya
    Bosna Hersek
    Bulgaristan
    Cebelitarık
    Çek Cumhuriyeti
    Danimarka
    Estonya
    Faroe Adaları
    Finlandiya
    Fransa
    Guernsey
    Hırvatistan
    Hollanda
    İngiltere
    İrlanda
    Isle of Man
    İspanya
    İsveç
    İsviçre
    İtalya
    İzlanda
    Jersey
    Karadağ
    Kıbrıs
    Kuzey Makedonya
    Letonya
    Liechtenstein
    Litvanya
    Lüksemburg
    Macaristan
    Malta
    Moldova
    Monako
    Norveç
    Polonya
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin