Publiko produktet
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
Flow600 heat recovery ventilator
    Helty

    Flow600 heat recovery ventilator

    Ideal for installations in hospitality facilities, offices, schools and kindergartens, Flow600 Steel allows flexible modulation of the air renewal rate with air flow rates ranging from 250 m³/h (minimum speed) up to 600 m³/h (maximum speed in hyperventilation), with four intermediate air flow settings. This ensures maximum design flexibility for applications requiring high air change rates in medium- to high-occupancy environments. The unit is equipped with an enthalpy cross-flow heat exchanger, ensuring heat recovery efficiency of up to 82% and requiring no condensate drain. Excellent filtration performance is guaranteed by the Coarse 80% + ePM1 80% filter set, supplied as standard. Flow600 is natively integrated into a white-painted steel cover, complete with air supply and exhaust openings, allowing exposed installation without the need for additional aesthetic cladding. The unit can be installed ceiling-mounted or in a vertical wall-mounted configuration, using a dedicated duct-cover casing that allows management of air supply and exhaust connections on either the right or left side, to meet specific design requirements. Installation requires only two 200 mm core drillings on the perimeter wall, or alternatively four 100 mm openings. Thanks to the CO₂ and VOC sensors, Flow600 is able to monitor key parameters for occupant well-being, such as relative humidity, carbon dioxide levels and volatile organic compounds. By detecting values in real time, the HRV unit automatically adjusts the air renewal rate according to the actual needs of the ventilated environment.
    Teknik özellikler
    • Benzersiz ref.Flow600
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2026-02-09
    • Baskı numarası1
    İlgili
    • Tasarım yeriİtalya
    • Üretim yeriİtalya
    Sınıflandırma
    • BIMobject kategorisiHVAC - Isı Kazanımı

    Bölge bulunurluk durumu

    Avrupa
    Åland
    Almanya
    Andorra
    Arnavutluk
    Avusturya
    Belçika
    Beyaz Rusya
    Bosna Hersek
    Bulgaristan
    Cebelitarık
    Çek Cumhuriyeti
    Danimarka
    Estonya
    Faroe Adaları
    Finlandiya
    Fransa
    Guernsey
    Hırvatistan
    Hollanda
    İngiltere
    İrlanda
    Isle of Man
    İspanya
    İsveç
    İsviçre
    İtalya
    İzlanda
    Jersey
    Karadağ
    Kıbrıs
    Kuzey Makedonya
    Letonya
    Liechtenstein
    Litvanya
    Lüksemburg
    Macaristan
    Malta
    Moldova
    Monako
    Norveç
    Polonya
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin