EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2–Splash Zone certified
Precisely formed lens provides maximum efficiency/reduced glare
Seamless closed-cell gasket, poured and formed in place
Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
Liquid-tight power entry
Standard stainless steel latches protect the fixture from corrosion in harsh environments
Tamper-resistant latches available
Low ambient option for extreme cold environments such as walk-in freezers and refrigerated spaces
High-performance up to 158 lm/W
DLC Compliant
Build America, Buy America and Buy American Act compliant
Wireless in-fixture control solutions available
Made Right Here^® in the USA

Özellikler

Enclosure	Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.
Internal Housing	.050″ aluminum.
Latching	Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).
Reflector	95% reflective highly specular aluminum.
Reflective Surfaces	92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.
Shielding	Frosted, impact-resistant acrylic.
Electrical	High-quality mid-power LED board. L70 >72,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option. 50/60 Hz constant current driver.
Power Supply	Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.
Mounting	Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.
Listings	• cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option. • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X. • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL. • Pressure wash rated to 1500 PSI. • RoHS compliant. • Build America, Buy America (BABA) and Buy American Act (BAA) compliant. Request certification at hew.com/buy-american.
Warranty	5-year limited warranty, see details

Teknik özellikler

Benzersiz ref.egl-enclosedgasketed-industrial
Ürün ailesiIndoor Luminaires
Ürün grubuVandal Resistant
TipObje (Tekil Nesne)
Yayınlanma tarihi2025-06-18
Baskı numarası1

Bağlantılar

Ürün URL’sihttps://hew.com/products/EGL
Kurulum talimatlarıhttps://hew.com/instruction/EGL2_instructions.pdf
Teknik açıklamahttps://hew.com/specifications/EGL_led.pdf

İlgili

Ana malzemeMetal
İkincil malzemeCam
Tasarım yeriBirleşik Devletler
Üretim yeriBirleşik Devletler

Sınıflandırma

BIMobject kategorisiAydınlatma - Tavan Monteli
IFC sınıflandırmasıAydınlatma Armatürü
Uniclass 2015 koduEF_70_80
Uniclass 2015 açıklamasıLighting
CSI MasterFormat 2014 kodu26 51 13
CSI MasterFormat 2014 başlığıInterior Lighting Fixtures, Lamps, And Ballasts
OmniClass numarası23-35 47 11
OmniClass başlığıLighting Fixtures

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları