Publiko produktet
Wall-hung boiler  VICTRIX PRO 35 V2 EU
Wall-hung boiler  VICTRIX PRO 35 V2 EU
Wall-hung boiler  VICTRIX PRO 35 V2 EU
Wall-hung boiler  VICTRIX PRO 35 V2 EU
Wall-hung boiler  VICTRIX PRO 35 V2 EU
Wall-hung boiler  VICTRIX PRO 35 V2 EU
    IMMERGAS

    Wall-hung boiler VICTRIX PRO 35 V2 EU

    High-power, wall-hung condensing boiler for heating only. Designed for professional plant rooms, it guarantees high performance with reduced consumption thanks to a wide modulation range up to 1:5 for VICTRIX PRO 150 V2 EU. Compact and linear design featuring a vertical sliding door to protect the electronic control panel. Suitable for floor-standing installations using a specific modular support frame for self-supporting configurations. The standard control electronics allow the management of cascade systems up to 5 boilers, utilizing advanced thermoregulation logic for maximum system flexibility. IPX5D electrical protection rating and standard anti-freeze kit down to -5 °C for outdoor installations, even in unsheltered areas via a dedicated cabinet. The engineering of VICTRIX PRO V2 drastically reduces environmental impact, positioning it in the prestigious eco-friendly Class 6, the highest category for limiting polluting emissions. The new VICTRIX PRO V2 can operate with natural gas, LPG, and hydrogen blends up to 20%.
    Özellikler
    • Wall-hung, room-sealed, fan-assisted premix condensing modules, featuring high efficiency and forced circulation with variable heat outputs. The generators are certified for installation both in plant rooms and outdoors (with specific protection for unsheltered installations), and can be used in either room-sealed fan-assisted or open-flue fan-assisted configurations. The module consists of: • a total premix combustion system with a cylindrical multigas steel burner, complete with ignition electrodes and an ionization control electrode; • a primary gas/water heat exchanger with a composite casing, including an air vent valve and an internal stainless steel coil; • a stainless steel combustion chamber internally insulated with ceramic panels; • an electronically variable-speed flue gas exhaust fan and a flue gas probe; • a condensate disposal circuit including a siphon and a flexible drain pipe; • a hydraulic group consisting of a flow manifold, a primary circuit pressure transducer, and a low-consumption modulating circulation pump; • a 4-bar system safety valve and a standard discharge funnel; • an overtemperature water safety thermostat; • an electronic board with continuous flame modulation, 1:10 modulation range; • a system flow and return regulation probe, heating flow temperature from 20 to 85 °C; • an IPX5D electrical protection rating, with the possibility of outdoor installation under an additional cover (unsheltered); • standard anti-freeze protection down to -5 °C (-15 °C with a specific optional kit); • pre-arrangement for cascade operation (up to 5 generators with a single safety kit); • possibility of installation using a free-standing support frame kit, suitable for installing one or more VICTRIX PRO V2 units; • possibility of installing the generator inside a cabinet suitable for unsheltered outdoor installation; • possibility of connecting to a remote system management system (optional), when paired with the cascade and zone controller; • compatible with the Ø 80 mm flexible chimney lining system (single installation).
    Teknik özellikler
    • Benzersiz ref.VICTRIXPRO35V2EU
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2026-06-30
    • Baskı numarası1
    • Yükseklik (mm)851
    • Genişlik (mm)440
    • Derinlik (mm)499
    İlgili
    • Tasarım yeriİtalya
    • Üretim yeriİtalya
    • Ağırlık net (Kg)50
    Sınıflandırma
    • BIMobject kategorisiHVAC - Su ısıtıcıları
    • IFC sınıflandırmasıSu ısıtıcı
    • OmniClass numarası23-33 11 00
    • OmniClass başlığıCommercial Boilers

    Bölge bulunurluk durumu

    Avrupa
    Åland
    Almanya
    Andorra
    Arnavutluk
    Avusturya
    Belçika
    Beyaz Rusya
    Bosna Hersek
    Bulgaristan
    Cebelitarık
    Çek Cumhuriyeti
    Danimarka
    Estonya
    Faroe Adaları
    Finlandiya
    Fransa
    Guernsey
    Hırvatistan
    Hollanda
    İngiltere
    İrlanda
    Isle of Man
    İspanya
    İsveç
    İsviçre
    İtalya
    İzlanda
    Jersey
    Karadağ
    Kıbrıs
    Kuzey Makedonya
    Letonya
    Liechtenstein
    Litvanya
    Lüksemburg
    Macaristan
    Malta
    Moldova
    Monako
    Norveç
    Polonya
    Portekiz
    Romanya
    Rusya
    San Marino
    Sırbistan
    Slovakya
    Slovenya
    Svalbard
    Ukrayna
    Vatikan
    Yunanistan
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin