Publiko produktet
INTRA Easy Automatic foam dispenser
Intra
Arşivlendi

INTRA Easy Automatic foam dispenser

Automatic Foam Soap Dispenser A foam drop is dispensed out of the nozzle on unit bottom each time its sensor is activated. Powered by 4 AA-size batteries (not included). Capacity: 33.8 oz. (1000 ml) of liquid foaming soaps within a wide range of viscosity.
Özellikler
  • Automatic Foam Soap Dispenser shall hold 33.8 oz (1000 ml) of liquid foaming soaps within the viscosity range of 5-1500cP (MPa∙s) and pH range of 5-9 and dispense in cycles of single shot foam volume ranging from 1/2 oz to 1/3 oz (7 cm³ to 9cm³) using 0.02 oz~0.03 oz (0.6~0.77 ml) liquid for each shot. Operation is initiated by hands-free sensor controlled bymicroprocessor digital circuitry powered by four (4) AA size 1.5V batteries (supplied by others) in a concealed compartmentand locked inside unit bottom. Unit shall be fabricated of 22 gauge (.031" [0.8] thick) type 304 stainless steel alloy 18-8 witha uniform satin finish over all exposed surfaces. Cover shall have lock keyed alike with other ASI washroom accessories. Unit shall have an LED to indicate function and operational condition on front face. Internal tank shall be translucent to show quantity of soap remaining at any time when cover is opened and shall be easily removed to facilitate filling and external storage of full tanks. Unit shall mount to wall on concealed base plate with screws secured under locked cover.
Teknik özellikler
  • Benzersiz ref.ASI20365
  • Ürün ailesiHygiene products
  • Ürün grubu351
  • TipObje (Tekil Nesne)
  • Baskı numarası1
  • Yükseklik (mm)276
  • Genişlik (mm)140
  • Derinlik (mm)102
İlgili
  • Ana malzemePaslanmaz Çelik
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiHijyenik - Dispenserlar
  • IFC sınıflandırmasıNesne
  • Uniclass 2015 koduPr_40_70_22_81
  • Uniclass 2015 açıklamasıSoap dispensers
  • OmniClass numarası23-31 25 29 13
  • OmniClass başlığıHand Soap Dispensers
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin