High Pressure Laminate Restroom Partitions

What is High Pressure Laminate?

High Pressure Laminate (HPL) is a durable and versatile material composed of multiple layers: The Wear layer is an overlay which protects the decorative layer that is the actual design of the laminate, whether that be custom printed, woodgrain, pattern, or solid color. Behind these two front layers is 6 to 8 sheets of resin. Two of these sheets are adhered to an engineered core and then heat and pressure is applied to create a single component to be used in toilet partitions.

High pressure laminate (HPL) toilet partition components are produced by gluing sheets of HPL to particle board core.
These sheets are machined, finished and cut to size. HPL components perform well in commercial restrooms and are
available in a extensive range of patterns, solids, and wood grains.

Application

High Pressure Laminate is an ideal choice for commercial restroom environments that require a balance of aesthetics and functionality. Its durability, moisture resistance, and wide range of design options make it suitable for various applications.

Özellikler

DESCRIPTION
High pressure laminate (HPL) toilet partition components are produced by gluing sheets of HPL to particle board core.
These sheets are machined, finished and cut to size. HPL components perform well in commercial restrooms and are
available in a extensive range of patterns, solids, and wood grains.
CONSIDERATIONS
- HPL is not suitable for use in wet or steam locations.
- HPL is not suitable in extreme abuse locations.
- Excessive fluids should be avoided during cleaning.
- Horizontal grain applications require consultation.
- Directional patterns have a maximum single, non-splice component
- width of 60 inch. Non-directional patterns cannot exceed 60 inch in
CONSTRUCTION
- HPL: horizontal, post form grade laminate .038 thick.
- Core: 45lb engineered wood board.
- Sheet adhesive: poly-vinyl acetate
- Edge: coordinated PVC banding is attached using PUR adhesive.
DIMENSIONS
- Headrail braced pilaster heights is 82 inch with 58 and 72 inch doors and 94.5 inch tall with 84 inch doors.
- Floor to ceiling pilaster heights are 1 inch less than floor to ceiling height to allow for hardware.
- Panel height will match selected door height. Panels are available from 3 to 60 inches wide.
Available Door Width
24 inch | 610 mm
34 inch | 864 mm
36 inch | 914 mm
Available Panel and Door Height
58 inch | 1473 mm
72 inch | 1829 mm
84 inch | 2134 mm
Standard Wood Veneer Pilaster Widths
mm: 76, 102, 127, 152, 178, 203, 229, 254, 305, 356, 406, 457, 508, 559, 610, 762
inch: 3, 4, 5, 6, 7, 8, 9, 1,0 ,12, ,14 ,16 , 18, 20, 22, 24, 30.

Teknik özellikler

Benzersiz ref.high-pressure-laminate
Ürün ailesiRestroom Partition
Ürün grubuHigh Pressure Laminate
TipObje (Tekil Nesne)
Yayınlanma tarihi2025-07-21
Baskı numarası1

Bağlantılar

İlgili

Ana malzemeLaminat

Sınıflandırma

BIMobject kategorisiHijyenik - Perdeler ve Bölücüler
ETIM KoduEG017920
ETIM AdıSanitary partitions and cabins
Uniclass 2015 koduSs_25_12_65_60
Uniclass 2015 açıklamasıPlasterboard laminated partition systems
CSI MasterFormat 2014 kodu10 22 00
CSI MasterFormat 2014 başlığıPartitions
OmniClass numarası23-15 11 15
OmniClass başlığıSanitary Partitions and Cubicles

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları