Publiko produktet
HP-DS370 Intellivox - Active Beam Shaping Self Powered, Column Loudspeaker Array IP55 Rated - Cop

HP-DS370 Intellivox - Active Beam Shaping Self Powered, Column Loudspeaker Array IP55 Rated - Cop

Active Beam Shaping, Self Powered,
Column Loudspeaker Array, IP55 Rated
The Intellivox HP-DS370 is a self-contained, especially high-power and high-output, 2-way, wide-bandwidth beam-shaping powered loudspeaker column loudspeaker with a high degree of outdoor capability. The HP-DS370 is a modern update to the classic Intellivox DS1608, which was the world’s first commercially available beam-shaping high power loudspeaker array. Since beam shaping’s introduction in 1999 the Intellivox High Power models have been specified to solve the problems of speech intelligibility and musical reinforcement in large highly reverberant spaces and theatres. The Intellivox HP-DS370 is capable of delivering up to 108 dB SPL at 30 meters (100 ft), as well as a frequency response to 18kHz. With an array length of 3.7 meters (12’ 2”) the Intellivox HP-DS370 not only offers long throw capability but also greater control at low frequencies. Intellivox HP-DS370 is capable of covering a substantial audience area while maintaining an even sound pressure level throughout. For full range applications JBL-Axys Beam Shaping Subwoofers can be used in conjunction with the HP-DS370 to provide enhancement and control at low frequencies, resulting in a full-range high-fidelity performance system. The fourteen, high efficiency, 6.5” loudspeakers are arranged in accordance with our patented algorithm. Two coaxially mounted 1” compression drivers extend the HF response.

FEATURES

  • Superb Speech Intelligibility
  • IP-55 Outdoor Capable
  • Integrated Amplification and DSP
  • Slim Unobtrusive Design
  • Extended Frequency Response - up to 18kHz
  • Wide Horizontal Dispersion
  • Vertical Beam Shaping (DDS Technology)
  • 32-bit floating point DSP
  • Control of Vertical Beam Shaping
  • Dual Line Inputs
  • Volume Control
  • Delay (up to 20 seconds)
  • 8 band parametric EQ
  • 8 user definable, password protected presets on board (recallable through third party control devices)
  • AVC (Automatic Volume Control) via build-in ambient mic.
  • Upgradeable firmware
  • Network Ready
  • Integral Surveillance
  • Simulation via DDA, Catt-Acoustic, Odeon and EASE4.3

APPLICATIONS

  • Transport Hubs
  • Sports Arenas
  • Large Places of Worship
  • Lecture Halls and Theatres
  • Large Conference Facilities
  • Atriums
  • Museums

OPTIONS

  • Full range of mounting accessories
  • Color matching service
Teknik özellikler
  • Benzersiz ref.HP-DS370-Intellivox-Active-Beam-Shaping-Self-Powered-Column-Loudspeaker-Array
  • Ürün ailesiInstalled Sound
  • Ürün grubuIntellivox Series
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-01-06
  • Baskı numarası1
İlgili
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiElektronikler - Ses Sistemleri
  • IFC sınıflandırmasıNesne
  • ETIM KoduEC000682
  • ETIM AdıLoudspeaker set
  • UNSPSC adıAudio and visual presentation and composing equipment
  • UNSPSC kodu4511
  • Uniclass 2015 koduPr_70_75_36_50
  • Uniclass 2015 açıklamasıLoudspeakers
  • CSI MasterFormat 2014 kodu11 52 00
  • CSI MasterFormat 2014 başlığıAudio-Visual Equipment
  • OmniClass numarası23-37 15 29 11 13
  • OmniClass başlığıLoudspeakers

Bölge bulunurluk durumu

Kuzey Amerika
Anguilla
Antigua ve Barbuda
Aruba
Bahamalar
Barbados
Belize
Bermuda
Birleşik Devletler
Caribbean Netherlands
Cayman Adaları
Curaçao
Dominik
Dominik Cumhuriyeti
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
İngiliz Virjin Adaları
Jamaika
Kanada
Kostarika
Küba
Martinique
Meksika
Montserrat
Nikaragua
Panama
Porto Riko
Saint Barthélemy
Saint Kitts ve Nevis
Saint Lucia
Saint Martin
Saint Pierre ve Miquelon
Saint Vincent ve Grenadines
Sint Maarten
Trinidad ve Tobago
Turks ve Caicos Adaları
Virjin Adaları
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin