Publiko produktet
Berko - SRA Series - Commercial Fan-Forced Wall Heater
Berko - SRA Series - Commercial Fan-Forced Wall Heater
Berko - SRA Series - Commercial Fan-Forced Wall Heater
Berko - SRA Series - Commercial Fan-Forced Wall Heater

    Berko - SRA Series - Commercial Fan-Forced Wall Heater

    Whether you have an open area like an office, conference room or lobby or you need extra warmth in your stairwell, entryway or hall, this commercial fan-forced wall heater provides the comfort your buildings occupants require.

    • Contemporary, commercial-grade steel grille, designed to provide comfort through optimized airflow
    • Power on/off switch for added safety during maintenance
    • Manual reset thermal overheat protector disconnects power in the event of accidental blockage
    • Automatic fan delay eliminates cold drafts on start-up and discharges residual heat from the heater body during shut down
    • Integral thermostat allows for easy adjustment of room temperature to maintain desired comfort level
    • All units have a permanently lubricated fan motor, which creates long life and low maintenance, and gently distributes warmth throughout the area
    • Tamper-proof plug for thermostat hole

    IDEAL SPACES |Vestibules; Entrance Ways; Lobbies; Hallways; Stairwells; Restaurants; Conference Rooms; Offices;Basements; Family Rooms; Bedrooms

    Özellikler
    • COLORS |Northern White

      TEMP RANGE |40-85F

      CFM | 65

      GRILLE | 12-1/8″ H x 10-5/8″ W x 7/8″ D

      BACK BOX |11 H x 9-1/4 W x 4 D

    Teknik özellikler
    • Benzersiz ref.Berko-SRA-Architectural-Commercial-Fan-Forced
    • Ürün ailesiUnit Heaters
    • Ürün grubuBerko
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2014-03-10
    • Baskı numarası1
    İlgili
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiHVAC - Isıtıcılar

    Bölge bulunurluk durumu

    Kuzey Amerika
    Birleşik Devletler
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin