Publiko produktet
Mora Cera Duo Miniprofi kitchen mixer
Mora Armatur

Mora Cera Duo Miniprofi kitchen mixer

Eletronic kitchen mixer with soft closing, energy and water saving aerator and C-spout. Flexible spout with nozzle with two spray patterns (normal and rinse). Adjustable flow control and temperature limiter. Soft PEX® hoses with 3/8" connecting nut. Out of 4MS approved brass. Chrome.
RSK 8310680 NRF 4290248 VVS 716270524

Modern technology has found its way into the kitchen faucet.
Now you don´t have to worry about the risk of bacteria moving onto your kitchen faucets while you cook. Mora Cera Duo is a perfect combination of the modern touchless technology and a traditional kitchen mixer. This gives you the possibility to get full cold or warm water by using the lever like on a traditional single lever mixer. This also works well in a household where not everyone is comfortable with the touchless design and still wants access to the lever. The water temperature for water activated by the sensor is pre-set on the mixing valve placed under the mixer, this means that you don´t need to adjust the temperature on the lever before using the touchless function. The Duo mixer offer not only maximum protection against the spread of bacteria, but are also extremely economical because they deliver the exact amount of water that is needed. The mixer is equipped with all advanced technology that you normally find in Mora Armatur mixer – ESS, Soft Closing, EcoSafe® etc. Low power consumption - Battery Operated (battery included) can be adapted for mains operation 12V AC/DC.

Özellikler
  • Nozzle with two spray patterns (normal and rinse). ESS (energy saving system). Ceramic cartridge with soft closing function. Adjustable flow control and temperature limiter. Eco (energy and water saving aerator). Swivel spout, limitation part for 60°, 85°, 110° or 360° included. Flush Timeout - safety shut-off to prevent flooding. Can be turned off for 5 min. (eg for cleaning). Low power consumption - Long life. IP class sensor, IP67. Approved non-return valves, EN-Standard EN1717 . Installation: Automatic sensor calibration. All models can be adapted for either battery 6V or mains operation 12V AC/DC. Mains operation requires installation of the AC adapter 729478.AE, and power supply 729470 alternatively transformator 729475. Soft PEX® hoses with 3/8" connecting nut (stainless steel braided). Hole diameter Ø34-37 mm. Settings: Programmable detection distance. Adjustable flush time.
Teknik özellikler
  • Benzersiz ref.242402
  • Ürün ailesiElectronic Mixers
  • Ürün grubuMora Cera
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2020-03-13
  • Baskı numarası1
  • Yükseklik (mm)480
  • Genişlik (mm)56
  • Derinlik (mm)281
İlgili
  • Ana malzemePirinç
  • İkincil malzemeKrom
  • Tasarım yeriİsveç
  • Üretim yeriİsveç
  • Ağırlık net (Kg)3.81
Sınıflandırma
  • BIMobject kategorisiMutfak - Musluklar ve Karıştırıcılar
  • IFC sınıflandırmasıTefriş Elemanı
  • UNSPSC adıPlumbing fixtures
  • UNSPSC kodu3018
  • Uniclass 2015 koduPr_40_20_87_84
  • Uniclass 2015 açıklamasıSink taps
  • CSI MasterFormat 2014 kodu22 41 39
  • CSI MasterFormat 2014 başlığıResidential Faucets, Supplies, and Trim
  • OmniClass numarası23-31 11 00
  • OmniClass başlığıFaucets
  • CSI UniFormat II koduD2010
  • CSI UniFormat II başlığıPlumbing Fixtures

Bölge bulunurluk durumu

Avrupa
Åland
Almanya
Andorra
Arnavutluk
Avusturya
Belçika
Beyaz Rusya
Bosna Hersek
Bulgaristan
Cebelitarık
Çek Cumhuriyeti
Danimarka
Estonya
Faroe Adaları
Finlandiya
Fransa
Guernsey
Hırvatistan
Hollanda
İrlanda
Isle of Man
İspanya
İsveç
İsviçre
İtalya
İzlanda
Jersey
Karadağ
Kıbrıs
Kuzey Makedonya
Letonya
Liechtenstein
Litvanya
Lüksemburg
Macaristan
Malta
Moldova
Monako
Norveç
Polonya
Portekiz
Romanya
Rusya
San Marino
Sırbistan
Slovakya
Slovenya
Svalbard
Ukrayna
Vatikan
Yunanistan
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin