Publiko produktet
Raychem TraceTek Fast Fuel Sensor Probe with Leader Cable and Metal Connector
Chemelex

Raychem TraceTek Fast Fuel Sensor Probe with Leader Cable and Metal Connector

Fast Fuel Sensor Probe with Leader Cable and Metal Connector

Raychem TraceTek TT-FFS-WR fast fuel sensor is a range of FM7745 approved fast acting probes (100 mm and 250 mm) designed to detect hydrocarbon fuel floating on water, spreading on a flat surface or collecting in a sump. The probe ignores water, but detects a thin film of fuel floating on the surface. Often used for indoor back-up generator and fuel supply monitoring.

Özellikler
  • Features

    • Fast response to small amount of fuel, resets for multiple uses
    • Simple and fast to install, suitable for installation in CID1 (Zone 0) with appropriate safety barrier (small, lightweight, easily tested)
    • Easy to design, compatible with all Raychem TraceTek alarm and locating modules: intermix up to 3 FFS probes with TT5000 sensor cable, for hybrid cable and probe systems

    Specifications

    Detection: Fuel

    Detection Method: Raychem Conductive-Polymer Technology

    Model: Fast Fuel Sensor

    Operating Temperature: -40 - 185 °F

    Suitable for Outdoor Installation: No

Teknik özellikler
  • Benzersiz ref.raychem-tracetek-tt-ffs
  • Ürün ailesiRaychem North America
  • Ürün grubuLeak Detection Systems
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2021-05-18
  • Baskı numarası1
  • Yükseklik (inç)11.6
  • Genişlik (inç)1
İlgili
  • Ana malzemePolipropilen
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
  • Ağırlık net (Lbs)0.46
Sınıflandırma
  • BIMobject kategorisiElektrik - Sensörler
  • ETIM KoduEC001588
  • ETIM AdıElectronic switch

Bölge bulunurluk durumu

Kuzey Amerika
Birleşik Devletler
Kanada
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin