Publiko produktet
Toilet cisterns PUCCI ® eco ® 6l-3l MODULO
Toilet cisterns PUCCI ® eco ® 6l-3l MODULO
    Pucciplast

    Toilet cisterns PUCCI ® eco ® 6l-3l MODULO

    TO BE INSTALLED IN FRONT OF BRICK OR PREBUILT WALLS - FOR WALL MOUNTED BOWL 

    FIELDS OF APPLICATION

    • Partial or total height front brick wall fixing
    • Light plasterboard walls
    • For wall mounted bowl
    • Two quantities water rinsing 1323360201
    Özellikler
    • FEATURES AND EQUIPMENT - Polyethylene tank 8 cm total thickness - Anti-condensation - Plaster holder pre-built mesh - Front control with two quantities rinsing - Water connection from above misaligned on the left - 1/2” stop cock with support - 19 x 25 cm flush pipe and protection cap - Ø 60-40 mm rubber plug - From Ø 40 mm to Ø 45 extension socket OR 143 and Ø 55-44 mm clamp - Gasket lubricant package - Foam protection for door and inner parts - Dust-painted selfstanding frame - Frame profile width 35 mm - Distance between bowl fitting holes 180/230 mm - 2 M12 threaded rods with bowl fixing nuts - Adjustable basic from 0 to 200 mm zinc-coated plates to be anchored - Basic revolving plates - Ø 110-90 mm reduction ring - Ø 90 mm PE flush curve with gasket - Ø 90 mm protection cap - Ø 90 mm extended sleeve with gasket - 2 washers with eccentric short joint for WC regulation - 2 protection caps - Fixing materials, brackets and plugs TECHNICAL DATA dynamic pressure 0,1-10 bar maximum water temperature 25°C rinsing quantity predetermined setting - out 6-3l long - rinsing regulation range 6-4l short - rinsing regulation range 3-2,5-2l
    Teknik özellikler
    • Benzersiz ref.ToiletcisternsPUCCIeco6l-3lMODULO
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2026-01-16
    • Baskı numarası1
    Sınıflandırma
    • BIMobject kategorisiHijyenik - Toilet Cisterns
    • ETIM KoduEC010864
    • ETIM AdıSurface-mounted flushing reservoir
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin