Publiko produktet
Commercial Tankless System - Wall Hung
Commercial Tankless System - Wall Hung

    Commercial Tankless System - Wall Hung

    Rheem® Commercial Tankless System

    This custom-built tankless solution arrives on the jobsite factory-assembled with single point connections, including:

    • RTGH-CM95 Condensing Tankless Water Heaters
    • Factory installed system control manifold
    • Pre-sized water and gas manifold
    • Electrical wiring
    • Condensate lines

     Configurations

    •  Wall mounted system
    •  Wall hung system
    • Free-standing system 

    System Options

    • 2-6 tankless units per system
    • Indoor & Outdoor systems
    • Common venting options for up to 10 units
    • Easy manifolding of up to 20 units

     Engineered Solution by Rheem

    •  Scalable from 11,000 BTU/h to 1,199,400 BTU/h per system (6 units max per system rack, multiple racks can be linked up to 20 total units or 3,998,000 BTU/h)
    •  Multiple configurations
    •  Options for future expansion

     Installation Savings

    • Reduce installation costs with single point connections Industry Best Solutions
    • Minimum side to side clearances = 1/2 inch (to combustibles)
    • Minimum fow rate = 0.26 GPM
    • Minimum activation rate = 0.40 GPM
    • UL-1738 & ULC-S636 certification on PPs venting accessories Redundancy

    Efficiency

    • Up to 96% Thermal Efficiency with stainless steel condensing heat exchanger
    • Intelligent electronic controls designed to increase energy efficiency and safety

    Performance

    • Low flow fixture compatible – Industry minimum flow rate of .26 GPM and minimum activation flow rate of .40 GPM ensures the user will receive hot water even in low demand situations
    • Recirculation Pump Kit-Ready – Quickly pairs with our Recirculation Pump kit to provide instantaneous hot water at the tap2

    Easy Installation and Service

    • Ability to vent with room air
    • Indoor, Natural Gas units are common vent compatible up to 10 units
    • Common venting with Polypropelene 
    • Built-in condensate neutralizer
    • 1/2" Gas line compatibility on every model
    • Exclusive! Maintenance Notice Setting Alerts – flashing a warning code to call for service check
    • Self-diagnostic system for easy installation and service
    • Digital display shows temperature setting and maintenance codes
    • Two-pipe direct vent system designed for PVC pipe (up to 38 ft. of 3" PVC pipe or 5 ft. of 2" PVC pipe)
    • High altitude capability up to 8,400 ft
    • Commercial Project Sizing Available from Rheem Applications Engineers
    • Digital remote control and 10 ft. of thermostat wire included
    • Freeze protection to -30°F

    Technology

    • Manifold control models - with factory installed translator links up to 20 units
    • Hot-start programming - helps minimize fluctuation in water temperature, referred to as “cold water sandwich”, during periods of frequent on/off operation
    • Exclusive! Overheat film wrap with industry-best side to side clearance of 1/2 inch

    Parts & Accessories

    • EZ Rack Kit
    • Common Venting: Direct Vent & Room Air header kits
    • AllClear®  Water Treatment System
    Özellikler
    • Specifications

      • 95 - 96% Thermal Efficiency  
      • Standard Max High Temperature 185 ºF
      • Manifold Control Models link up to 20 units
      • Common Venting Compatible
      • Service valves included
      • 199,900 BTU/h per unit
      • Commercial Project Sizing Available
    Teknik özellikler
    • Benzersiz ref.CTS_WH
    • Ürün ailesiTankless
    • Ürün grubuCommercial Gas
    • TipObje (Tekil Nesne)
    • Yayınlanma tarihi2018-09-10
    • Baskı numarası1
    İlgili
    • Ana malzemeÇelik
    • Tasarım yeriBirleşik Devletler
    • Üretim yeriBirleşik Devletler
    Sınıflandırma
    • BIMobject kategorisiSıhhi tesisat - Water heaters
    • ETIM KoduEC000392
    • ETIM AdıInstantaneous water heater
    • Uniclass 2015 koduSs_55_70_38_45
    • Uniclass 2015 açıklamasıInstantaneous hot water supply systems
    • CSI MasterFormat 2014 kodu22 34 13
    • CSI MasterFormat 2014 başlığıInstantaneous, Tankless, Gas Domestic Water Heaters
    • OmniClass numarası23-31 29 11 13
    • OmniClass başlığıGas Instantaneous Hot Water Heaters

    Bölge bulunurluk durumu

    Kuzey Amerika
    Birleşik Devletler
    Kanada
    Common.Footer.ValueProp.Image.AltText

    Revit için Tasarım Uygulaması

    Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

    Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

    • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
    • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
    • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin