Publiko produktet
Spain_CubInclinadasInvert_TejasCeramicas+SopraXPS+Edilstick2TNT_267mm
SOPREMA

Spain_CubInclinadasInvert_TejasCeramicas+SopraXPS+Edilstick2TNT_267mm

m2 Inclined roof on a concrete support that must offer a flat surface, consisting of: Self-adhesive waterproofing consisting of: asphalt primer with a minimum amount of 300 gr./m2 type EMUFAL PRIMER, self-adhesive sheet on one side composed of polymeric bitumen reinforced with non-woven Polyester Felt reinforced and stabilised with fibreglass and coated on the upper side with a TEXface polypropylene non-woven fabric type EDILSTICK 2mm TNT/RAND designation: LBA-20-FP according to UNE 104410-2013; Thermal insulation layer consisting of rigid sheets of extruded polystyrene with a compressive strength of 3 kp/cm2 and a grooved surface on the upper side, 80 mm thick, type SOPRAXPS TR 80, adhered to the sheet with a single-component polyurethane foam adhesive or type ALSAN FOAM MF placed in 30 mm thick cords, ready to receive the finish with a mortared tile or adhered with points of polyurethane foam adhesive.
Teknik özellikler
  • Benzersiz ref.SOL000426
  • Ürün ailesiwaterproofing
  • Ürün grubuWaterproofing system for roof
  • Tipİnşaat Malzemesi
  • Yayınlanma tarihi2025-07-25
  • Baskı numarası1
İlgili
  • Ana malzemeBitumen
  • İkincil malzemeGenleştirilmiş Polistren (XPS)
  • Tasarım yeriİspanya
  • Üretim yeriİspanya
Sınıflandırma
  • BIMobject kategorisiYapı - Çatı
  • IFC sınıflandırmasıÇatı
  • ETIM KoduEG020300
  • ETIM AdıBuilding - Roofing materials
  • Uniclass 2015 koduEF_30_10
  • Uniclass 2015 açıklamasıRoofs
  • OmniClass numarası23-13 39 00
  • OmniClass başlığıRoof Coverings, Claddings, Linings

Bölge bulunurluk durumu

Avrupa
İspanya
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin