Publiko produktet
Spain_CubPlanaTransVehic_AglomeradoAsfaltico+MorterplasSbsParking+MorterplasSbsFv4kg_227mm
SOPREMA

Spain_CubPlanaTransVehic_AglomeradoAsfaltico+MorterplasSbsParking+MorterplasSbsFv4kg_227mm

Cover consisting of: formation of slopes with cellular concrete with an average thickness of 8 cm finished in cement mortar with an average thickness of 2 cm with the necessary surface resistance to receive the waterproofing; Two-layer waterproofing membrane ADHERED to the support with EMUFAL PRIMER asphalt emulsion with a minimum application of 300 gr./m2, SBS elastomeric modified bitumen sheet with fibreglass felt (FV) reinforcement with flexibility at low temperatures ≤ -15ºC type MORTERPLAS SBS FV 4 kg (LBM-40-FV according to UNE 104410:2013), upper sheet fully adhered to the lower sheet of SBS elastomeric bitumen, with reinforced and stabilised polyester felt (FP) reinforcement, with an upper finish also in non-woven polyester (FP) and a hot-melt film on the lower layer with flexibility at low temperatures ≤-15ºC type MORTERPLAS SBS PARKING (LBM-48-FP according to UNE 104410:2013), finishing layer made of asphalt agglomerate.
Teknik özellikler
  • Benzersiz ref.SOL000446
  • Ürün ailesiwaterproofing
  • Ürün grubuWaterproofing system for roof
  • Tipİnşaat Malzemesi
  • Yayınlanma tarihi2025-06-19
  • Baskı numarası1
İlgili
  • Ana malzemeBitumen
  • Tasarım yeriİspanya
  • Üretim yeriİspanya
Sınıflandırma
  • BIMobject kategorisiYapı - Çatı
  • IFC sınıflandırmasıÇatı
  • ETIM KoduEG020300
  • ETIM AdıBuilding - Roofing materials
  • Uniclass 2015 koduEF_30_10
  • Uniclass 2015 açıklamasıRoofs
  • OmniClass numarası23-13 39 00
  • OmniClass başlığıRoof Coverings, Claddings, Linings

Bölge bulunurluk durumu

Avrupa
İspanya
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin