Publiko produktet
Ceiling (indoor unit) MMC-AP 024 027 8HP-E
TOSHIBA

Ceiling (indoor unit) MMC-AP 024 027 8HP-E

INDOOR UNIT CEILING TYPE FOR VISIBLE INSTALLATION, FOR VRF TYPE SYSTEM WITH VARIABLE REFRIGERANT FLOW RATE
REFRIGERANT R410A ,
Direct expansion multi-row battery with aluminium finned copper tubes.
N° 2 refrigerant filters on liquid and gas side to preserve the functioning of the electronic expansion valve and reduce noise.
Auto-cleaning system: the exchanger is coated with a special resin that allows the condensate water to clean it of any dust residues accumulated during operation.
Fan directly coupled to a three-speed single-phase induction motor, with electrical protection by means of a thermal switch.
Regenerable and washable synthetic fibre filter.
Pre-cut for primary air inlet.
Optional condensate drain pump.
In case of power failure of the machine, the remaining system continues to operate and reports the anomaly.

Özellikler
  • Technical details:
    - Avaible sizes: 1.7 - 2 - 2.5 - 3 - 4 - 5 - 6 (from 4,5 to 16,0 kW in cooling mode)
    - Full control on deflettore
    - 3 different refrigerator lines: from upper side, from back side and machine right side 
    - Drain-line: from 2 different directions
    - Self-cleaning function

Teknik özellikler
  • Benzersiz ref.pensile-a-soffitto-vrf-024-027
  • Ürün ailesiHVAC - Business VRF
  • Ürün grubuIndoor unit
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2019-04-15
  • Baskı numarası1
İlgili
  • Ana malzemeMetal
Sınıflandırma
  • BIMobject kategorisiHVAC - Klima
  • IFC sınıflandırmasıHava Terminali
  • UNSPSC adıAir conditioners
  • UNSPSC kodu40101701
  • Uniclass 2015 koduEF_65_80
  • Uniclass 2015 açıklamasıAir conditioning
  • CSI MasterFormat 2014 kodu23 36 00
  • CSI MasterFormat 2014 başlığıAir Terminal Units
  • OmniClass numarası23-33 41 00
  • OmniClass başlığıHVAC Air Terminals
  • CSI UniFormat II koduD30
  • CSI UniFormat II başlığıHVAC

Bölge bulunurluk durumu

Avrupa
İtalya
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin