Publiko produktet
VK681 - Model V-BB (Back to Back) Specific Application Attic Sprinkler
Arşivlendi

VK681 - Model V-BB (Back to Back) Specific Application Attic Sprinkler

The Viking Model V-BB (Back to Back) Attic Sprinklers are UL Listed for both wet and dry pipe systems in combustible and non-combustible sloped attic spaces, and can be installed with steel or CPVC piping. (CPVC is allowed on wet pipe systems only.) When used with Viking's Model V-SD (Single Directional) and VK696 Attic Upright sprinklers, it is possible to utilize a single line of piping at the attic peak, eliminating the need for branch lines and greatly reducing the number of required sprinklers and associated materials. The Model V-BB is a glass bulb design with a temperature rating of 200° F, and is offered in either standard brass or ENT plating for areas subject to corrosion. The Viking Model V-BB Attic Sprinkler provides a reduced response time due to its narrow ridge spacing of 6 ft (1,8 m) and long throw pattern (up to 30 ft in each direction measured horizontally), and is offered in three different slope ranges and two different orifice sizes (K=5.6 or 8.0).
Özellikler
  • K-Factor: K8.0 (115)

    Manufacturer: Viking

    Page: F_042915

    Part Number: 19627,19801,19754,19626,19798,19751

    VK Number: VK681

    Additional Information: NOTICE: The product details indicated below are for general reference only and may vary based on the specific product approval and/or application. Always verify product details with the technical data sheet and consult with the Authority Having Jurisdiction (AHJ).

    Max Pressure: 175 psi (12 bar)

    Response Type: Fast-Attic

    Occupancy Type: Special

    Thread Size: None

    Min Spacing: Per Standards / Listings

    Max Spacing: Per Standards / Listings

Teknik özellikler
  • Benzersiz ref.vk681-fast-attic-back-to-back-sprinkler-k80
  • Ürün ailesiViking Fire Sprinklers
  • Ürün grubuViking - Attic Sprinkler / Back to Back
  • TipObje (Tekil Nesne)
  • Yayınlanma tarihi2021-01-25
  • Baskı numarası1
İlgili
  • Tasarım yeriBirleşik Devletler
  • Üretim yeriBirleşik Devletler
Sınıflandırma
  • BIMobject kategorisiYangın Ürünleri - Sulama Sistemleri
  • ETIM KoduEC011371
  • ETIM AdıSpray sprinkler
  • UNSPSC adıFire sprinkler heads
  • UNSPSC kodu46191610
  • Uniclass 2015 koduPr_70_55_97_84
  • Uniclass 2015 açıklamasıSprinkler heads
  • CSI MasterFormat 2014 kodu21 13 00
  • CSI MasterFormat 2014 başlığıFire-Suppression Sprinkler Systems
  • OmniClass numarası23-29 33 11
  • OmniClass başlığıWater Based Suppression Equipment
  • CSI UniFormat II koduD4010
  • CSI UniFormat II başlığıSprinklers
Common.Footer.ValueProp.Image.AltText

Revit için Tasarım Uygulaması

Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

  • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
  • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
  • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin