Hizmetlerimizi sunmak için çerezler kullanıyoruz

Hizmetlerimizi kullanarak çerezlerin kullanımını kabul edersiniz


Özgün ref.: rheatherm-600
Marka: VPI
Ürün ailesi: ITE
Ürün grubu: Rhéatherm
İle (mm): 1200
Yükseklik (mm): 600
Yayınlanma tarihi: 2018-01-03
Sürüm: 3
Tip: Obje (Tekil Nesne)
indirme (8)

RHEATHERM 600 is an External Thermal Insulation Composite System (ETICS) developped by Vicat Produits Industriels (VPI) which is made of a thin hydraulic undercoat containing fibres, reinforced with glass fibres meshes, and applied directly to the insulating panels of expanded polystyrene (white or graphite), bonded or mechanically fixed with anchors or by profile on the wall (concrete or masonry, new or existing walls). RHEATHERM 600 is consistent with the fire regulation by installing rockwool bands. Fit for all kinds of buildings (public-access building, collective dwelling, etc.).

Finishing is ensured by:
- a coating based on organic resin (CRÉPILOR), siloxane (LITHOCOLOR) or organo-siloxane (CRÉPILANE) available in 680 colors
- an acrylic binder paint (FLEXODERM) available in 680 colors,
- a thick mineral coating based on lime (RÉNOPASS CHAUX GF / GM, RHÉAJET) available in 59 colors.

Thermal insulation
Expanded polystyrene insulation thickness: bonded ETICS: 20 to 300 mm
Thermal resistance of the white expanded polystyrene panel: 0,50 to 7,90 m².K/W – Thermal conductivity: 0,038 W/(m.K)
Thermal resistance of the graphite expanded polystyrene panel: 0,60 to 9,65 m².K/W - Thermal conductivity: 0,031 W/(m.K)

Reaction to wind
Bonded ETICS: no limitation ; ETICS can be bonded with RHÉAMIX MONO (3,0 k/m²) or RHÉACOL PSE (4,0 k/m²).
Mechanically fixed ETICS: wind load resistance increases according the number of anchors and insulating thickness ; there is a need to increase the number of anchors on the singular points and the peripheral areas ; ETICS can be fixed with anchors noted in the ETE.

Reaction to fire
Classification A2-s1, d0 to B-s2, d0 according to finishing

Impact resistance
Categories III, II and I according to finishing and mesh types

Ana malzeme: Insulation
İkincil malzeme: Organic
Tasarım yeri: France
Üretim yeri: France

BIMobject Kategorisi: Building Materials - Insulation
IFC sınıflandırması: Building Element
UNSPSC adı: Insulation
UNSPSC kodu: 3014
Uniclass 1.4 Kod: JM21
Uniclass 1.4 Tanım: Insulation with rendered finish
Uniclass 2.0 Kod: PR-45-64-26
Uniclass 2.0 Tanım: Expanded Polystyrene (Eps) Boards
Uniclass 2015 Kod: Pr_25_71_63_26
Uniclass 2015 Tanım: Expanded polystyrene (EPS) boards
NBS Reference Kod: 45-64-26
NBS Reference Tanım: Expanded Polystyrene (Eps) Boards
CSI MasterFormat 2014 Code: 07 24 00
CSI MasterFormat 2014 Title: Exterior Insulation and Finish Systems
OmniClass Numarası: 23-13 25 19 11 11 11
OmniClass Başlığı: Expanded Polystyrene Slab and Board Thermal Insulation
CSI UniFormat II Code: C3010
CSI UniFormat II Title: Wall Finishes
Bu ürün burada mevcut:
  • France

BIMobject SEEK Properties

Building Materials - Insulation

İsim Değer
Flame Spread Index Euroclass B-s2, d0 ; Euroclass A2-s1, d0
Installation Mechanically Attached ; Fully Adhered
Material EPS ; PSE ; Polystyrene
Thermal Insulance Lambda = 0,031 W/m·K ; Lambda = 0,038 W/m·K
Thermal Resistance 0.60 — 9.65 m²K/W
Thickness 20 mm — 300 mm

Bütün BIM objeleri gerçek üreticilerin doğrulanmış ve onaylanmış gerçek ürünleridir.