Publiko produktet
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
Wilkins 950XL3 Double Check Valve, 3/4" - 2"
    Wilkins

    Wilkins 950XL3 Double Check Valve, 3/4" - 2"

    Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. Assembly shall provide protection where a potential non-health hazard exists

    Compliance (Horizontal and Vertical)

    • ASSE® Listed 1015, Horizontal and Vertical Up
    • cUPC® Listed
    • CSA® Certified B64.5, Horizontal and Vertical Up
    • AWWA Compliant C510
    • UL® Classified (less shut-off valves)
    • C-UL® Classified
    • Approved by the Foundation for Cross Connection
    Control and Hydraulic Research at the University of
    Southern California
    • Meets the requirements of NSF/ANSI/CAN 61 and 372*
    *(Less than 0.25% Weighted Average Lead Content

    Features:

      • Compact and shortest bronze small backflow valve on the market allowing for installation versatility
      • All-bronze body ensures durability against the elements, with a Noryl®* check body and stainless-steel fasteners to resist corrosion over time.
      • EZSWAP® modular check with top access speeds up repairs and replacements
      • Test ports located on valve’s centerline make install and testing easy
      • Interlocking connected checks provide ¼ turn to access and disassemble.
      • Low-cost repair kits extend the lifespan at a significantly lower cost
      • Lead Free* (0.25% max. weighted average lead content)
      • ASSE Listed, UPC® Listed, Meets NSF/ANSI/CAN 61 & 372 requirements; Approved by the Foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California; Safe Drinking Water Act Compliant


        Özellikler
        • The Double Check Type Backflow Preventer shall be certified to NSF/ANSI/CAN 61, shall be ASSE Listed 1015, rated to 180°F, and supplied with full port ball valves. The main body and access cover shall be low lead bronze (ASTM B 584), the seat ring and all internal polymers shall be Noryl™ and the seat disc elastomers shall be silicone. The first and second check shall be located at an angle and accessible for maintenance from the top of the device, without removing the device from the line. The checks shall share a single access cover and test cocksshall be accessible from the top of the device. The Double Check Type Backflow Preventer shall be a ZURN
          WILKINS Model 950XL3

          Keywords:Thermal expansion tank,pressure relief valves,Double Check Backflow Preventer,backsiphonage,Cross Connection Control,double check valve backflow preventer,shut-off valves,water thermal expansion,Double Check Backflow Assembly,cartridge assembly,inlet shut-off valve,EZSwap,shock arresters, 112-950XL3,114-950XL3,1-950XL3,2-950XL3,34-950XL3

        Teknik özellikler
        • Benzersiz ref.zurn-950xl3
        • Ürün ailesiBackflow Preventers
        • Ürün grubuReduced Pressure Principle Assembly
        • TipObje (Tekil Nesne)
        • Yayınlanma tarihi2025-09-02
        • Baskı numarası1
        İlgili
        • Ana malzemeBronze
        • Tasarım yeriBirleşik Devletler
        Sınıflandırma
        • BIMobject kategorisiSıhhi tesisat - Valfler
        • IFC sınıflandırmasıValf
        • Uniclass 2015 koduPr_65_54_94_72
        • Uniclass 2015 açıklamasıReduced pressure zone valves
        • CSI MasterFormat 2014 kodu40 05 67
        • CSI MasterFormat 2014 başlığıSpecialized Pressure and Flow-Control Valves
        • OmniClass numarası23-27 31 47
        • OmniClass başlığıPressure Regulating Valves

        Bölge bulunurluk durumu

        Kuzey Amerika
        Anguilla
        Antigua ve Barbuda
        Aruba
        Bahamalar
        Barbados
        Belize
        Bermuda
        Birleşik Devletler
        Caribbean Netherlands
        Cayman Adaları
        Curaçao
        Dominik
        Dominik Cumhuriyeti
        El Salvador
        Grenada
        Grönland
        Guadeloupe
        Guatemala
        Haiti
        Honduras
        İngiliz Virjin Adaları
        Jamaika
        Kanada
        Kostarika
        Küba
        Martinique
        Meksika
        Montserrat
        Nikaragua
        Panama
        Porto Riko
        Saint Barthélemy
        Saint Kitts ve Nevis
        Saint Lucia
        Saint Martin
        Saint Pierre ve Miquelon
        Saint Vincent ve Grenadines
        Sint Maarten
        Trinidad ve Tobago
        Turks ve Caicos Adaları
        Virjin Adaları
        BIMobject ürün kütüphanesi

        Revit için Tasarım Uygulaması

        Aileleri tek tıklamayla doğrudan Revit modelinize yükleyin

        Yeni nesnelere daha kolay erişebileceğiniz, Revit ailelerinizi saklayabileceğiniz ve ekibinizle işbirliği yapabileceğiniz bir yer edinin.

        • Onay işaretiDoğrudan Revit'in yanındaki BIM nesneleriyle çalışın
        • Onay işareti 2 GB Bulut depolama alanı - Revit içeriğinizi depolayın
        • Onay işareti Doğrudan Revit'ten gömülü karbon LCA (A1-A3) edinin