Публікуйте свої продукти
ARDEX SD M™ Designer Floor Finish™
ARDEX SD M™ Designer Floor Finish™
    ARDEX

    ARDEX SD M™ Designer Floor Finish™

    ARDEX SD-M™ is a self-drying, trowelable topping for fast-track finishing or resurfacing of interior concrete, terrazzo and ceramic, quarry and porcelain tile. A blend of Portland cement and other hydraulic cements, ARDEX SD-M can be used to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing.

    Key Features

    • Use over concrete, terrazzo and ceramic, quarry and porcelain tile
    • Provides a smooth, permanent, durable finish
    • Easy to mix and apply
    • Mixes with water only, no additives necessary
    • Outstanding coverage with excellent bond
    • Mold and mildew resistant
    • Portland cement-based
    • Use for interior floors only
    • Can be used to create a burnish-polished surface on indoor concrete
    • Can be used as pinhole filler for polished concrete and ARDEX Polished Concrete Systems (APCS) applications
    Специфікація
    • Installation

      Mixing Ratio: 2 quarts (1.9 L) of water to one 10 lb. (4.5 kg) bag
      For smaller batches, use 2.5 parts powder to 1 part water by volume for the scratch and finish coat, or 3.5 parts powder to 1 part water for filling pop-outs and spalls.
      Coverage: 80 – 100 sq. ft. (7.4 – 9.3 sq. m) per bag in 2 coats; (Actual coverage may vary)

      Performance

      Initial Set (ASTM C191): Approx. 45 minutes
      Final Set (ASTM C191): Approx. 90 minutes
      Compressive Strength (ASTM C109/mod – Air Cure Only): 5,000 psi (352 kg/sq. cm.) at 28 days
      Flexural Strength (ASTM C348): 1,200 psi (84 kg/sq. cm.) at 28 days
      Walkable: 2 hours
      Begin Processing: 24 – 72 hours
      Colors Available: Gray and White
      Packaging: 10 lb. (4.5 kg) bag
      Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly.
      VOC: 0
      Shelf Life: 6 months, if unopened
      Warranty: ARDEX L.P. Standard Limited Warranty applies.

    Технічна специфікація
    • Унікальний номерARDEX-sd-m
    • Сімейство продуктівARDEX Surfaces
    • Група продуктівOverlays and Toppings
    • ТипObject (single object)
    • Дата публікації2024-02-21
    • Номер видання1
    Класифікація
    • Категорія BIMobjectПідлогове покриття - Underlay
    • Класифікація IFCFloor
    • Назва UNSPSCCarpet or rug underlays
    • Код UNSPSC30161719
    • Код Uniclass 2015Pr_35_31_06_80
    • Опис Uniclass 2015Smoothing and levelling underlay compounds
    • Код CSI MasterFormat 201406 16 26
    • Заголовок CSI MasterFormat 2014Underlayment
    • Номер OmniClass23-15 17 11 13 11 13
    • Заголовок OmniClassPortland Cement Floor Underlayments
    • Код CSI UniFormat IIB1010
    • Заголовок CSI UniFormat IIFloor Construction

    Доступність регіону

    Північна Америка
    Ангілья
    Антигуа і Барбуда
    Аруба
    Багамські Острови
    Барбадос
    Беліз
    Бермудські Острови
    Британські Віргінські острови
    Віргінські Острови (США)
    Гаїті
    Гваделупа
    Гватемала
    Гондурас
    Гренада
    Гренландія
    Домініка
    Домініканська Республіка
    Кайманові Острови
    Канада
    Карибські Нідерланди
    Коста-Рика
    Куба
    Кюрасао
    Мартиніка
    Мексика
    Монтсеррат
    Нікарагуа
    Острови Теркс і Кайкос
    Панама
    Пуерто-Рико
    Сальвадор
    Сен-Бартелемі
    Сен-Мартен
    Сен-Пʼєр і Мікелон
    Сент-Вінсент і Гренадіни
    Сент-Кітс і Невіс
    Сент-Люсія
    Сінт-Мартен
    Сполучені Штати
    Тринідад і Тобаго
    Ямайка