Sloped Wall Canopy Exhaust Hood with Perforated Supply Plenum, SND-2 Series
(18 відгуки)SND-2 Series
CaptiveAires's Premier Sloped Canopy Hood
The SND-2 Series is a Type I, Sloped Wall Canopy Hood for use over 400°F and 600°F cooking surface temperatures. The Sloped Canopy is the ideal hood choice for low ceiling heights.
ADVANTAGES
PERFORMANCE
Avg. Cooking Surface Temperature (°F)ConfigurationMin. Exhaust CFM/ft400°F - Ovens, Steamers, Kettles, Open-Burner Ranges, Griddles, FryersSingle Wall Hood
2 Wall Hoods Back-to-Back228
456600°F - Gas Charbroilers, Electric Charbroilers Single Wall Hood
2 Wall Hoods Back-to-Back 294
588*Recommended Duct Sizing: Exhaust - Based on 1500 FPM
OPTIONS
Models SND-2 are ETL Listed under file number 3054804-001 and complies with UL710, ULC710 and ULC-S646 Standards.
CaptiveAires's Premier Sloped Canopy Hood
The SND-2 Series is a Type I, Sloped Wall Canopy Hood for use over 400°F and 600°F cooking surface temperatures. The Sloped Canopy is the ideal hood choice for low ceiling heights.
ADVANTAGES
- Superior Exhaust Flow Rates
- ETL Listed: ETL Listed for use over 400°F and 600°F cooking surface temperatures, which provides flexibility in designing kitchen ventilation systems. ETL Listed to US and Canadian safety standards, ETL Sanitation Listed and built in accordance with NFPA 96.
- Capture and Containment: Insulated, double-wall rigid front has aerodynamic design that reduces radiant heat into kitchen, prevents condensation and provides exceptional capture and containment of cooking vapors. The signature "mechanical baffle" on the front of the hood's capture area is available on 18" Front Model only.
- Convenient Design: Factory pre-wired lighting to illuminate the cooking surface is accessible from the bottom of the hood. Pre-punched hanging angles on each end of hood and additional set provided for hoods longer than 12'.
- Construction: Polished stainless steel on the interior and exterior of the front enhance aesthetics. Fully welded and polished front corners. Fabricated from Type 430 stainless steel with option of Type 304 available. Sloped front for low ceiling applications.
- Grease Extraction: All hoods come standard with stainless steel baffle filters and a deep grease trough which allows for easy cleaning. Grease drain system with removable 1/2 pint cup for easy cleaning.
PERFORMANCE
Avg. Cooking Surface Temperature (°F)ConfigurationMin. Exhaust CFM/ft400°F - Ovens, Steamers, Kettles, Open-Burner Ranges, Griddles, FryersSingle Wall Hood
2 Wall Hoods Back-to-Back228
456600°F - Gas Charbroilers, Electric Charbroilers Single Wall Hood
2 Wall Hoods Back-to-Back 294
588*Recommended Duct Sizing: Exhaust - Based on 1500 FPM
OPTIONS
- Utility Cabinet Listed for integral side mount and fabricated of same material as hood. Cabinet can house listed fire suppression system and listed, pre-wired electrical controls.
- Front Perforated Supply Plenum: Provides low velocity make-up air for the kitchen and is discharged in front of the hood. Perforated diffuser plates allow for even air distribution and supply riser includes a volume damper for easy balancing. Side Perforated Supply Plenums can be added to optimize the air flow if necessary.
- Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.
- End Panels: Should be used to maximize hood performance and eliminate the effects of cross drafts in kitchen. units constructed of stainless steel and sized according to hood width and cooking equipment. Exposed edges hemmed for safety and rigidity.
- Separate Exhaust and/or Make-Up Air Fans ETL Listed single exhaust fans and supply-air fans and curbs available.
- Fire Suppression System: UL 300 fire suppression system.
- Lighting: Recessed Incandescent, Recessed Fluorescent, Compact Fluorescent, Recessed LED, Halogen
- Optional Self Cleaning Technology: The system cleans grease from the plenum and portion of the duct with the daily hot water spray cycle.
- Optional CORE Protection: The CORE Fire Protection System is an automatic, pre-engineered fire suppression system which is ETL listed to UL Standard 300. The CORE Protection System is designed to provide primary coverage for ventilating equipment including hoods, ducts, plenum and filters.
Models SND-2 are ETL Listed under file number 3054804-001 and complies with UL710, ULC710 and ULC-S646 Standards.
Доступність регіону
| Північна Америка |
|---|
Ангілья |
Антигуа і Барбуда |
Аруба |
Багамські Острови |
Барбадос |
Беліз |
Бермудські Острови |
Британські Віргінські острови |
Віргінські Острови (США) |
Гаїті |
Гваделупа |
Гватемала |
Гондурас |
Гренада |
Гренландія |
Домініка |
Домініканська Республіка |
Кайманові Острови |
Канада |
Карибські Нідерланди |
Коста-Рика |
Куба |
Кюрасао |
Мартиніка |
Мексика |
Монтсеррат |
Нікарагуа |
Острови Теркс і Кайкос |
Панама |
Пуерто-Рико |
Сальвадор |
Сен-Бартелемі |
Сен-Мартен |
Сен-Пʼєр і Мікелон |
Сент-Вінсент і Гренадіни |
Сент-Кітс і Невіс |
Сент-Люсія |
Сінт-Мартен |
Сполучені Штати |
Тринідад і Тобаго |
Ямайка |
Українська
