HiSec 9 Security Portal | Gunnebo Entrance Control

Drive

Motorised security booth that is connected to a ratio motor operated by a

direct current engine with regulated speed.

Electronic frame along the profiles and safety torque sensing.

Materials

Structure: Embossed painted steel section powder coated finish

RAL color 9006

Glass: Lite:

11/12 mm laminate Safety Glass P4A BR1/S

(in accordance with EN356-EN1063) - Safety Manifestation on

moving glass door

Bullet proof:

26/27 mm laminate Safety Glass P6B BR3/S

(in accordance with EN356-EN1063) - Safety Manifestation on

moving glass door

Ceiling: Laminated HPL finished Pearl Grey

Base Plate: High-strength laminate with finishing in colour Plumb Grey

Sliding door: Printed frame in polyethylene terephthalate RAL 7040

Light

A low voltage light is positioned internally on the ceiling.

Detection

The HiSec booth is equipped with a ultrasound system which determines if

more than one person is present inside the booth.

Power failure / Fire alarm

In the event of a power failure, isolation or after the BBU has been depleted,

the outer, un-secure door will fail safe, i.e. unlocked and can be manually

pushed open. The inner, secure door will fail lock and is held in place via a

lever system situated behind a locked panel above the door on the secure side

of the installation. The inner door can be manually opened by rotating a knob

located behind the lockable service panel in the top mechanism section of the booth