Chief Fusion® Tilt Wall Mount

The Chief Fusion® Tilt Wall Mount is a fixed-to-wall, tilting flat panel mount built around Chief’s Fusion interface, which is shared across the broader Fusion mount family so that ceiling plates, wall plates, and accessories are cross-compatible. The mount uses a Centris tilt mechanism that allows the display to be angled downward from the wall — typically in a range of roughly +2° to -12° or +5° to -12° depending on the specific model — which is useful when a screen is mounted higher than eye level and needs to be angled toward the viewer.

Once installed, Chief’s Centerless lateral shift lets installers slide the display up to roughly 264 mm (10.4 in) left or right on the wall plate to center it precisely over studs, outlets, or an architectural feature, without needing to reposition the wall plate itself. ControlZone provides about 25 mm (1 in) of independent height and leveling adjustment after the mount is on the wall, and ClickConnect latching lets the display snap onto the wall plate without tools, then release again for service. Cable management end caps keep power and signal cabling tidy behind the display.

The Fusion Tilt line covers a wide span of the market, with individual models supporting displays from roughly 24 in up to 100 in (610–2540 mm) and weight capacities from about 75 lb up to 250 lb (34–113.4 kg) depending on the size selected. VESA compatibility ranges from 75 x 75 mm on the smallest models up to 1070 x 600 mm on the largest, and the mount can be installed to studs spaced 16–32 in or 24–42 in apart. Orientation options include landscape-only and landscape/portrait models.

The line carries UL Listing and TAA compliance, and several models hold OSHPD pre-approval documentation, which is relevant for California healthcare and seismic-sensitive installations. Typical applications include corporate meeting and huddle rooms, classrooms, healthcare facilities, retail, and general digital signage — essentially any wall installation where the display needs to tilt downward toward the viewer.