Combidock leveller 253NG

The Loading Systems Combidock leveller 253NG is made from high-quality durbar plate. The telescopic lip is divided into three sections, the leveller can be used for loading both lorries and delivery vans. When loading delivery vans, the weight of the leveller will be compensated, to prevent the van from overloading. 

Standard safety provisions:

• Fully hydraulic safety stop;
• Emergency stop switch with reset facility;
• Fixed and moving toe guards;
• Robust adjustable support legs for cross traffic;
• Black / yellow safety markings
• Permanent maintenance support;
• Thermal relay electric motor protection;
• Operating pictographs;
• Mandatory selection of operating mode;
• Acoustic signalling for overloading in 20kN mode.

Standards
The telescopic lip dock leveller 233NG has the CE-marking. All loading Systems dock levellers are in compliance with all safety aspects stipulated in the European Directive EN 1398.

Technical Specifications

• Standards CE-marking
• Loading capacity (EN 1398) 20/60 kN
• Construction height 800 - 1000 mm
• Sliding length 0 – 500 mm (1000 mm as an option)
• Lip angle ca. 5°
• Motor 1,1 kW
• Power supply 400 V / 50 Hz / 2,5 A
• Control current 24 V DC
• Protection class IP 54
• Working pressure ca. 100 bar
• Outside diameter main cylinder 65 mm
• Outside diameter lip cylinder 50 mm
• Operating temperature -30° till +50° Celsius
• Standard colour RAL 9005 (black)

No rights may be derived from the BIM models.