Swing lip dock leveller 232 100kN

Platform and lip are made from high-quality durbar plate. Depending on the width, the dock leveller 232 100kN is strengthened along its length by means of 20 set L-profiles. The rear of the top platform is connected to the lower frame by means of 6 hinges (8 on 2250mm wide model). These hinges can easily withstand the applied forces. Similar pins are used for the lip hinge at the front of the platform top.

Standard safety provisions:

• Fully hydraulic safety stop by means of a pipe rupture valve built into the cylinder;
• Emergency stop switch with reset facility;
• Non-retractable sliding and fixed toe guards;
• Robust extra wide lip keepers for transverse movements (cross traffic)
• Black / yellow markings
• Motor safeguards by means of a thermal relay;
• Control panel instruction symbols.

Standards
The swing lip dock leveller 232 100kN has the CE-marking. All loading Systems dock levellers are in compliance with all safety aspects stipulated in the European Directive EN 1398.

Technical Specifications

• Standards CE-marking
• Loading capacity (EN 1398) 100kN
• Construction height 600 mm
• Lip length 400 mm (till 500 mm as an option)
• Lip angle (ca. 4°) 45 mm
• Motor 0,75 kW
• Power supply 3 phase, neutral and earth / 400 V
• Control current 24 V DC
• Protection class IP 54
• Working pressure ca. 70 bar
• Outside diameter main cylinder 65 mm
• Outside diameter lip cylinder 55 mm
• Operating temperature -30° till +50° Celsius
• Standard colour RAL 9005 (black)

No rights may be derived from the BIM models.