Swing lip Jumbo dock leveller 232jNG

Materials
Platform and lip are made of high-quality durbar plate: durbar plate 6/8 for the platform and durbar plate 12/14 for the lip.

Depending on the width, the platform is reinforced with eight profiles in longitudinal direction. Ramps with a width of 2250 mm are reinforced by ten profiles. These profiles allow the platform top to ‘twist’ and compensate for vehicle ‘tilt’ caused by off-set loads within the vehicle. The lip will remain in contact with the vehicle bed.

Technical specifications

• Standards CE
• Capacity (EN 1398)60 kN
• Building height 750 / 900 mm
• Lip length 400 mm
• Lip angle ± 4°
• Motor 1,1 kW
• Power supply 400 V / 50 Hz / 2,5 A
• Control current 24 VDC
• Protection class IP 54
• Working pressure ± 100 bar
• Outside diameter main cylinder 65 mm
• Outside diameter lip cylinder 45 mm
• Operating temperatures between -30°C and +50°C
• Standard colour RAL 9005 black

Options / accessories

• Various types of pit construction
• Special dimensions
• Air seals on three sides of the platforms
• Primer
• RAL colour as required
• Bottom side of the platform provided with PU insulation
• Other voltage
• Tapered lip on both sides
• Greater lip length
• Hot dip galvanised
• Rest position switch for control of traffic light, door, etc.
• Dock leveller-/door interlocking
• Upgraded protection class
  

No rights may be derived from the BIM models.