Telescopic lip Jumbo dock leveller 233NG

Dimensions
The 233JNG dock leveller can be supplied to customer specifications. For the standard types with a height of 750mm or 900mm, six platform sizes are available.

Materials
Platform and lip are made of high-quality durbar plate: durbar plate 8/10 for the platform and durbar plate 12/14 for the lip. Depending on the width, the telescopic lip is reinforced with six profiles in longitudinal direction. Ramps wider than 2100mm are reinforced by eight profiles. This ensures an optimum connection between lip and truck floor while a high lateral torsion of the platform is guaranteed.

Standard safety provisions:

• Fully hydraulic safety stop;
• Emergency stop switch with reset facility;
• Non-retractable sliding toe guards;
• Sturdy steel supports for transverse movements (cross traffic);
• Black / yellow safety markings
• Non-removable safety strut;
• Motor safeguards by means of a thermal relay;
• Control panel instruction symbols.

The telescopic lip Jumbo dock leveller 233JNG has the CE-marking. All loading Systems dock levellers are in compliance with all safety aspects stipulated in the European Directive EN 1398.

Technical specifications

Standard CE Marking
Capacity (EN 1398) 60 kN
Building height 750mm / 900mm
Lip length 0-500 mm (till 1000mm as an option)
Lip angle ± 5°
Motor 1,1 kW
Power supply 400 V / 50 Hz / 2,5 A
Control current 24 VDC
Protection class IP 54
Working pressure ± 100 bar
Outside diameter main cylinder 65 mm
Outside diameter lip cylinder 50 mm
Operating temperatures between -30° and +50°
Standard colour RAL 9005 black

No rights may be derived from the BIM models.