Exterior Wash Pro L QUAD Outdoor-rated QUAD color wash light with creative control

Physical

• Length: 165 mm (6.49 inch)
• Width: 275 mm (10.83 in.)
• Height: 370 mm (14.57 in.)
• Weight: 12.4 kg (27.3 lbs)

Dynamic Effects

• Intensity: 0 - 100%
• Color Mixing: RGB + CTC (Color Temperature Control)
• Color Temperature Control: 1000 K - 12500K in 50K steps

Control and Programming

• Control Systems: DMX, RDM
• User Interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone Control: Up to 20 scenes with individual fade/hold times
• Control Resolution: 8-bit DMX control of each color
• Dimmer Resolution: 16-bit DMX control of intensity
• DMX Channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
• DMX Compliance: USITT DMX512/1990
• RDM Compliance: ANSI/ESTA E1.20
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Firmware Update: Serial upload via DMX link

Optics

• Light Source: 16 x high-power RGBW LEDs
• Minimum LED Lifetime: 100,000 hours (to > 70% luminous output)*
• LED Manufacturer: Osram
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)

Beam Angle Options

• Native Beam Angle: 8°
• Narrow Micro Lens: 10°
• Medium Micro Lens: 16°
• Wide Micro Lens: 30°
• Very Wide Micro Lens: 54°
• Asymmetric Micro Lens: 9° x 56°

Photometric Data

• CRI (Color Rendering Index): > 70
• CCT: 1000K - 12500K (Default 4000K)
• Luminous Output:
  • Full: 7100 lm
  • Red: 2280 lm
  • Green: 4550 lm
  • Blue: 1870 lm
    (*Measured in steady state after 30 minutes warm-up at 25 °C ambient.)

Construction

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 or Traffic white RAL 9016 (other colors available on request)
• Surface Treatment: Anodized and electrostatic powder-coated
• Protection Rating: IP66
• Effective Projected Area (EPA): 0.097 m² / 0.120 m²
• Impact Resistance: IK08
• Corrosion Resistance: C5 High (ISO 12944-6)
• Vibration Resistance:
  • 1.0g, Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum Distance to Illuminated Surfaces: 0.1 m (0.3 ft.)

Connections

• Power Connection: 2 m (6.5 ft.) cable tail open-ended
• Power Input Cable Type:
  • EU Models: H07RN-F 3G 1.0 mm², 450/750V, VDE
  • US Models: PVC SJTW 3 x 1.31 mm² (16AWG) 105° C 300 V VW-1
• Data Connection: 2 m (6.5 ft.) open-ended 6-conductor combined input + output cable tail
• Hybrid Power/Data Cables (In & Thru): 8-pin custom connectors available on request

Electrical

• AC Power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power Supply Unit: Auto-ranging electronic switch-mode
• Typical Half-Cycle RMS Inrush Current: 13 A
• Surge Protection: 4 KV
• Max Earth Leakage: 0.5 mA
• Power Factor:
  • 0.99 @ 110 V / 120 V
  • 0.95 @ 208 V / 230 V
  • 0.92 @ 277 V
• Max Current Draw:
  • 1.50 A @ 100 V
  • 1.25 A @ 120 V
  • 0.65 A @ 230 V
  • 0.54 A @ 277 V

Power Consumption

• Maximum: 150 W (reduced mode 120W)*
• Idle: 3.5 W*
  (*Measurements made at nominal voltage. Allow for a deviation of +/- 10%. Idle: all LEDs at zero intensity.)

Thermal

• Cooling: Convection
• Maximum Ambient Temperature: 45° C (113° F)*
• Minimum Ambient Temperature: -30° C (-22° F)**
• Total Heat Dissipation: 512 BTU/hr (+/- 10%)
  (*Output is regulated above this temperature to prevent overheating. **Power must be maintained below -20° C (-4° F).)

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (Max Output): 43 lm/W
• LWR (Lumen-to-Weight Ratio): 516 lm/kg (234 lm/lb)*
  (*Packaging uses FSC certified cardboard inlay and outer box.)

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU Safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US Safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian Safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322 (Part 5/section 5)

Ordering Information - Fixtures

• Exterior Wash Pro L QUAD, EU, white: P/N MAR-90590103
• Exterior Wash Pro L QUAD, US, grey: P/N MAR-90590007
• Exterior Wash Pro L QUAD, EU, grey: P/N MAR-90590003

Ordering Information - Accessories

• Micro Lens Pro L - Narrow: P/N MAR-90590036
• Micro Lens Pro L - Medium: P/N MAR-90590037
• Micro Lens Pro L - Wide: P/N MAR-90590038
• Micro Lens Pro L - Very Wide: P/N MAR-90590039
• Micro Lens Pro L - Asymmetric: P/N MAR-90590040
• Baffle Snoot Pro L QUAD: P/N MAR-90590019
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD Cable Tail In/Out 0.5 m, Black: P/N MAR-91700020
• Attachment Plate for Safety Wire: P/N MAR-90590050
• Hybrid PD Cable Tail In/Out 0.5 m, White: P/N MAR-91700022