Flanged Double Branch 18ga

Nordfab 18 Gauge Double Branches are standard 30º between legs, optional 45º.

18 gauge galvanized steel material provides extra durability for high wear applications

Flanged Double Branches are standard with industry-standard Angle Flanges on both ends, the flanges are retained via a vanstone lip so that bolt holes can easily be aligned with those on existing flanged connections.

When ordering, specify A, B, C, and D. Note: (A – C) ≥ (C-B) and (C) ≥ (D)
Use the following formula to determine length: L = C X 2 + 15”
Available with QF ends in diameters up to 24", flanged diameters up to 72", and other end types
Other material gauges available include standard 22 and 20, 16, 14, 12 and 10
Flange gaskets available

Contact Nordfab or your local Nordfab dealer for assistance with optional end types, larger sizes, and material / gauge options.

Специфікація

A. General Fabrication Requirements: Comply with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Ch. 3, "Round, Oval, and Flexible Duct," based on indicated static-pressure class unless otherwise indicated.
1. Construct ducts of galvanized sheet steel unless otherwise indicated. 304SS Optional.
2. Basis-of-Design Product: Subject to compliance with requirements, provide Nordfab Ducting, LLC; Quick Fit (QF) Duct.
B. Connection Joints: Joint types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Quick Fit Joints in Ducts 3 to 24 inches (76 to 510 mm) in diameter. Flange: Optional.
2. Flanged Joints in All Ducts Greater than 24 inches (610 mm) in diameter.
C. Longitudinal Seams: Seam types are fabricated in accordance with SMACNA's "HVAC Duct Construction Standards - Metal and Flexible," Figure 3-2, "Round Duct Longitudinal Seams," for static-pressure class, applicable sealing requirements, materials involved, duct-support intervals, and other provisions in SMACNA's "HVAC Duct Construction Standards - Metal and Flexible."
1. Fabricated round ducts 3 to 24 inches (76 to 510 mm) in diameter to have laser-welded or plasma-welded longitudinal seams.
2. Fabricated round ducts above 24 inches (610 mm) in diameter to have plasma-welded longitudinal seams.

Технічна специфікація

Унікальний номерflanged-double-branch-18-gauge
Сімейство продуктівFlanged Ducting
Група продуктівBranches
ТипObject (single object)
Дата публікації2024-05-08
Номер видання1

Посилання

Url-адреса продуктуhttps://www.nordfab.com/en-us/products/fb-ducting/branches/flanged-double-branch-18-gauge
Технічний описhttps://www.nordfab.com/-/media/files/nordfab/americas/americas-product-data-sheets/nordfab_double_branch.pdf

Пов'язані

Матеріал основнийGalvanized steel
Матеріал допоміжнийStainless steel 304
Розроблено вСполучені Штати
Виготовлено вСполучені Штати

Класифікація

Категорія BIMobjectHVAC - Dust Collection
Класифікація IFCDuct Fitting
Код за ETIMEG015540
Назва за ETIMFittings, flanges and connectors
Код Uniclass 2015Pr_65_65_25
Опис Uniclass 2015Ductwork and fittings
Код CSI MasterFormat 201423 31 13.19
Заголовок CSI MasterFormat 2014Metal Duct Fittings
Номер OmniClass23-33 49 00
Заголовок OmniClassHVAC Ductwork

Доступність регіону

Північна Америка
Беліз
Бермудські Острови
Британські Віргінські острови
Канада
Коста-Рика
Мексика
Панама
Пуерто-Рико
Сен-Мартен
Сполучені Штати