Публікуйте свої продукти
Wind-Driven Rain Resistant Stationary Louver EME6325D
Ruskin

Wind-Driven Rain Resistant Stationary Louver EME6325D

The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
Tested to the following FBC/Miami Dade County Test protocols
TAS-100A Wind Driven Rain Test
TAS-201 Large Missile Impact Test
TAS-202 Uniform Static pressure 
TAS-203 Cyclic Pressure Test
Miami DADE NOA #20-1201.04
 Approved for locations up to 33 ft. above grade for "dry" room locations.
AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
AMCA Certified Air and Water Penetration.
Aluminum clip angle installation.

Специфікація
  • The EME6325D is Miami Dade and Florida approved.  This 6" deep vertical louver passed the TAS-100A wind driven rain test without a damper or sloped duct at rear.  It features:

    • AMCA 540 (Enhanced) and AMCA 550 listed louver with the Air Movement and Control Association
    • Tested to the following FBC/Miami Dade County Test protocols
    • TAS-100A Wind Driven Rain Test
    • TAS-201 Large Missile Impact Test
    • TAS-202 Uniform Static pressure 
    • TAS-203 Cyclic Pressure Test
    • Miami DADE NOA #20-1201.04
    •  Approved for locations up to 33 ft. above grade for "dry" room locations.
    • AMCA Certified Class A 99.9% effective ratio wind driven rain performance at both 29 mph and 50 mph.
    • AMCA Certified Air and Water Penetration.
    • Aluminum clip angle installation.

Технічна специфікація
  • Унікальний номерruskin-007
  • Сімейство продуктівFixed Exterior Louvers and Grilles
  • Група продуктівHurricane Louvers
  • ТипObject (single object)
  • Дата публікації2011-12-01
  • Номер видання1
Посилання
Класифікація
  • Категорія BIMobjectДвері - Жалюзи

Доступність регіону

Північна Америка
United States
Common.Footer.ValueProp.Image.AltText

Design App для Revit

Завантажуйте сімейства безпосередньо у вашу модель Revit одним кліком

Отримайте місце для легшого доступу до нових об’єктів, зберігайте свої сімейства Revit і співпрацюйте зі своєю командою.

  • ГалочкаПрацюйте безпосередньо з об'єктами BIM поруч із Revit
  • Галочка 2 ГБ хмарного сховища - зберігайте свій вміст Revit
  • Галочка Отримайте LCA (A1-A3) втіленого вуглецю прямо з Revit